Sagem 912, 929, 926, 920, 922, 910, 916, 919 Standard commands, Conference, Multi-conference calls

You can then:

Initiate a new call

then:

Switch between the calls by pressing Ok.

Cancel the call on hold by pressing C.

Merge several calls by pressing ✱. All the parties can communicate (MULTI-

CONFERENCE).

7.8 Multi-conference

(Service depending on the operator and depending on model)

This service allows you to be in relation with several persons, according to the capabilities of the network.

If you have established a MULTI- CONFERENCE, the screen displays MULTIPARTY followed by the sequence number assigned to each caller. You can:

Attention

In this case, pressing ends all calls.

27

Cancel a call on hold or waiting by pressing C.

Switch between the multi-conference call and a call on hold or waiting by pressing Ok or make a further call.

Make all the parties communicate by pressing ✱ (A multi-conference is limited to 6 persons: 5 in multi-conference and one separate call).

Standard commands

Sequences of standard keys also permit access to services such as call notification, call holding, multi-conferencing, and open up additional possibilities:

0	Reject a call holding or waiting (or
	multi-conference calls).
1	End the current call holding or
	waiting (or the multi-conference
	calls if there are any) and accept
	the call (or multi-conference calls).
1 X	End the current call order number
	X.

7. Call related features