8.5 Setting the timer

RNG & BEEP/TIMER

The same procedure is applied as for the alarm function, but in this case you start a time clock running against a defined value. The phone must remain switched on.

32

Setting the low battery tone

RNG & BEEP/BEEPS/BATT. BEEP

This menu allows your phone to emit a warning beep when the battery is low:

Display ACTIVE with the scrolling arrows, then validate.

8.6 Setting the beeps

Setting the keypad tones

RNG & BEEP/BEEPS/KEY. TONE

Choose the required tone by pressing the scrolling arrows, then validate.

Setting the network tone

RNG & BEEP/BEEPS/NETW. BEEP

This menu allows your phone to emit a warning beep when it finds a network on which it may operate:

Display ACTIVE with the scrolling arrows, then validate.

You can select the tones produced by your keypad: Beep, DTMF (musical keys) or non active tones (in this last case, when you press your keyboard, it does not make a noise).

8.7 Deleting DTMF tones

RNG & BEEP/SEND DTMF

This menu allows you to disable the transmission of DTMF tones during a conversation. You can therefore enter a number to be memorized in the phone book conveniently and discreetly.

Select ACTIVE or INACTIVE by pressing the scrolling arrows, then validate.

8. Ringing tones and vibrator

Page 33
Image 33
Sagem 926, 929, 920, 922, 912, 910, 916, 919 manual Setting the timer, Setting the beeps, Deleting Dtmf tones