Sagem 910, 929, 926, 920, 922, 912, 916, 919 manual Checking call duration, Charge-checking

2	Place on hold the current call (or
	multi-conference calls) and accept
	the call holding or waiting (or multi-
	conference calls).
2 X	Place on hold the multi-conference
	calls except for the current call
	order number X (private call).
3	Add a call holding (or multi-
	conference calls) to the current call
	(or to the multi-conference).
Tel N°	Place on hold the current call (or
	the multi-conference calls) and call
	another telephone number.
Note:	However, it is preferable to place

28

7.9 Checking call duration

CALLS/DURATION/COUNTERS

This menu allows you to check the duration of the last call. To check the cumulated duration of all calls since the last counter reset, press the scrolling arrows.

CALLS/DURATION/CLEAR

This menu allows you to clear the duration of the last call and to reset the call counter.

7.10 Charge-checking (*)

Attention

CALLS/COST/COUNTERS

the call on hold then dial, then call;

this guarantees comfort and

confidentiality (does not allow the

call holding to hear the dialling

tones whatever the configuration of

the phone).

End all calls except for a possible call waiting.

If the network allows, you can check the charge for the last call. To check the cumulated charge for all calls since the last counter reset:

Press the scrolling arrows.

CALLS/COST/CLEAR

This menu allows you to clear the cost of the last call and to reset the call counter after entering your PIN2 code.

This data is purely indicative and cannot constitute a basis of proof: the network metering criteria may be quite different (indivisible minutes etc.).

7. Call related features