DAYLIGHT VIEW
You can keep the projected image bright and vivid even in
Change setting 
Change setting
AUTO |
|
| ON |
|
| OFF |
|
|
|
| |||
AUTO |
| Automatic adjustment |
| |||
ON |
| Active |
| |||
OFF |
| Deactive |
| |||
Remarks
zzDo not cover the Ambient Luminance Sensor (ALS) of the projector. The AUTO mode may not operate normally.
zzAUTO is not available when INSTALLATION in PROJECTOR SETUP menu is set to REAR/DESK or REAR/CEILING.
STILL MODE
You can reduce the vertical flicker when projecting a still image.
(Available with signals of
Change setting 
Change setting
OFF | Deactive |
ON | Active |
Note
zzYou must set to OFF when projecting a moving image.
NOISE REDUCTION
You can switch the automatic noise reduction system on/off.
(Available with signals of
Change setting 
Change setting
OFF | No noise reduction |
ON | Automatic noise reduction |
Note
zzNOISE REDUCTION is set active when the selected input signal has less noise. Applying noise reduction may affect the image quality, if so, set to OFF.
PICTURE menu
TV-SYSTEM
When the video signal is changed, the setting switches automatically. You can switch the setting manually to match the video data.
(Available with signals of
Change setting 
Change setting
AUTO |
| NTSC |
| NTSC4.43 |
SECAM 
PAL-N 
PAL-M 
PAL
Note
zzAUTO mode is selected by default.
zzWhen the projector is not working properly in AUTO mode, change the setting according to each TV system type.
Remarks
zzAUTO setting will automatically select the compatible signal from NTSC/NTSC
RGB/YPBPR
AUTO mode is selected by default. If the image is not projected normally in the AUTO mode, select RGB or YPBPR according to the input signal.
The function becomes effective only when certain signals below are input.
(VGA60, 480i, 576i, 480p, 576p, 1 080/60i, 1 080/50i, 720/60p, 720/50p)
Select the signals to be input to the COMPUTER1 and COMPUTER2 IN terminal.
Change setting 
Change setting
AUTO | Automatic adjustment |
RGB | For RGB signals |
YPBPR | For YPBPR signals |
Settings
ENGLISH - 31
