Seagate ST118202LW/LC manual Regulatory agency compliance, Electromagnetic susceptibility

Page 9

Cheetah 18 Installation Guide, Rev. A

7

magnetische Strahlung sind für Designer von Untersystemen auf Anfrage von der Seagate-Sicherheitsabteilung erhältlich.

Regulatory agency compliance

Electromagnetic susceptibility

As a component assembly, the drive is not required to meet any susceptibility performance requirements. It is the responsibility of those integrating the drive within their systems to perform those tests required and design their system to ensure that equipment operating in the same system as the drive or external to the sys- tem does not adversely affect the performance of the drive. See DC power requirements on page 18.

Electromagnetic compliance

Seagate uses an independent laboratory to confirm compliance to the directives/standard(s) for CE Marking and C-Tick Marking. The drive was tested in a representative system for typical appli- cations. The selected system represents the most popular char- acteristics for test platforms. The system configurations include:

486, Pentium, and PowerPC microprocessors

3.5-inch floppy disc drive

Keyboard

Monitor/display

Printer

External modem

Mouse

Although the test system with this Seagate model complies to the directives/standard(s), we cannot guarantee that all systems will comply. The computer manufacturer or system integrator

Image 9
Contents Cheetah Disc Drive ST118202LW/LC Installation Guide Contents Electrostatic discharge protection PrefaceImportant safety information and precautions Page Wichtige Sicherheitshinweise Page Cheetah 18 Installation Guide, Rev. a Electromagnetic susceptibility Regulatory agency complianceElectromagnetic compliance for the European Union Seagate Technology support services SeaNET Seagate CompuServe forum Online servicesSeaFAX FAX servicesTechnical support Direct-support servicesCustomer service centers Manufacturer’s representatives General description Cheetah 18 family drive ST118202LW shown Characteristics ST118202LW/LC DC power requirements ±5%1 +5 +12 General information Drive modelsScsi ID jumpers Single-ended and low voltage differential modesPage Drive termination Circuits and data path widths Terminator powerCable characteristics for SE and LVD circuits Pin I/O connection to drive LW model Multiple-drive connection to host adapter Drive model LC with single 80-pin I/O and power connector Providing adequate cooling Kühlung des Systems Suggested air flow Installation des Laufwerkes und Anschluß der Kabel Mounting the drive and connecting cablesCheetah 18 Installation Guide, Rev. a DC power connector Abbildung 8. Gleichstromanschluß Hinweis Page Mounting configuration dimensions LW model Mounting configuration dimensions LC model Quick reference desktop system notes Formatting the driveLW drives Setting the Scsi ID jumpersTerminating the drive Setting terminator power jumpers Several other jumper options are available as illustrated Other applicable jumper optionsAdditional jumper options Drive Active LED indicator connections are shown below Drive Active indicatorLC drives Terminating the drive Other option jumpers are available as illustrated below Drive Active indicator