Roland VK-8 Rotary-related Settings, Preset button’s indicator extinguished Button Parameter

Advanced Use

Settings That Are Saved for the Entire System

■Rotary-related Settings

1.Hold down the HARMONIC BAR PART [UPPER] and [PEDAL] buttons and press the [TONE WHEEL] button.

The indicators of the buttons [1]–[8] will blink.

2.Press one of the buttons from [1] through [8] to select the parameter that you want to edit.

There are 14 rotary-related parameters. You can select all of these parameters by controlling the lighted/ extinguished state of the [PRESET] button’s indicator.

The following parameters are assigned to each button.

[PRESET] button’s indicator extinguished

Button	Parameter	Page
[1]	ROTARY WOOFER LEVEL	p. 50
[2]	ROTARY TWEETER LEVEL	p. 50
[3]	ROTARY WOOFER RISE TIME	p. 50
[4]	ROTARY TWEETER RISE TIME	p. 50
[5]	ROTARY WOOFER FALL TIME	p. 50
[6]	ROTARY TWEETER FALL TIME	p. 50
[7]	ROTARY WOOFER SPREAD	p. 50
[8]	ROTARY TWEETER SPREAD	p. 50

[PRESET] button’s indicator lighted

Button	Parameter	Page
[1]	ROTARY WOOFER SPEED SLOW	p. 50
[2]	ROTARY TWEETER SPEED SLOW	p. 50
[3]	ROTARY WOOFER SPEED FAST	p. 50
[4]	ROTARY TWEETER SPEED FAST	p. 50
[5]	ROTARY MIC DISTANCE	p. 50
[6]	ROTARY RANDOMIZE	p. 50

3.Turn the [VIBRATO AND CHORUS] knob to adjust the setting.

If you press the VIBRATO AND CHORUS [ON] button, the setting will return to the initial value.

4.If you want to adjust the setting of another parameter, press the appropriate button from [1] through [8] to select the parameter, and turn the [VIBRATO AND CHORUS] knob to adjust the setting.

When you want to stop editing, press the HARMONIC BAR PART [UPPER] button.

5.Press the [WRITE] button to finalize the settings of the rotary-related parameters.

Parameter settings will be saved.

While the parameters are being saved, the indicators of the [1]–[8] buttons will blink.

NOTE

Never turn off the power while parameters are being saved.

49