Roland VK-8 owner manual Midi Implementation, Channel Voice Messages Note off, Control Change

Page 71

MIDI Implementation

Model: VK-8 (Combo Organ)

Date:

Dec. 1, 2001

Version: 1.00

1. Receive data

*The VK-8 has two MIDI IN connectors: KEYBOARD IN and PEDAL IN. If the SUB KEYBOARD FUNCTION (p. 58) is ON, messages input to KEYBOARD IN will be received as messages for the Lower part, regardless of their channel number. Messages input to PEDAL IN will be received as messages for the Pedal part, regardless of their channel number (Omni On).

*When the SUB KEYBOARD FUNCTION (p. 58) is OFF, MIDI messages will control each part according to their MIDI channel number (Omni Off). At the factory settings, each part is set to the following transmit/receive channels.

-----------------------

CONTROL

1ch

UPPER ORGAN

1ch

LOWER ORGAN

3ch

PEDAL ORGAN

2ch

OTHER TONES

4ch

DRUMS

10ch

SPRING SHOCK

9ch

-----------------------

❍Expression (Controller number 11)

Status

2nd byte

3rd byte

BnH

0BH

vvH

n = MIDI channel number :

0H - FH (ch.1 - ch.16)

vv = expression :

 

00H - 7FH (0 - 127)

*If you want to control all of the Organ Parts, transmit data on the channel specified by the CONTROL MIDI CH. setting (factory setting: channel 1). It is not possible to separately control each part of the Organ Part.

*When the SUB KEYBOARD FUNCTION (p. 58) is ON, this has the same function as an expression pedal connected to the VK-8’s EXPRESSION PEDAL jack.

❍General Purpose Controller 1 (Controller number 16) (Other tones

glide)

Status

2nd byte

3rd byte

BnH

10H

vvH

n = MIDI channel number:

0H - FH (ch.1 - ch.16)

vv = control value :

 

00H - 7FH (0 - 127) 0-63 = OFF, 64-127 = ON

*Received only for the Other Tones Part.

*Not received when MIDI GENERAL CONTROLLERS SWITCH (p. 53) is OFF.

■Channel Voice Messages ●Note off

Status

2nd byte

3rd byte

8nH

kkH

vvH

9nH

kkH

00H

n = MIDI channel number :

0H - FH (ch.1 - ch.16)

kk = note number :

 

00H - 7FH (0 - 127)

vv = note off velocity :

00H - 7FH (0 - 127)

*When the SUB KEYBOARD FUNCTION (p. 58) is ON, the input to the KEYBOARD IN will be handled as messages for the LOWER PART, and the input to PEDAL IN will be handled as messages for the PEDAL PART.

●Note on

Status

2nd byte

3rd byte

9nH

kkH

vvH

n = MIDI channel number:

0H - FH (ch.1 - ch.16)

kk = note number :

 

00H - 7FH (0 - 127)

vv = note on velocity :

00H - 7FH (0 - 127)

*When the SUB KEYBOARD FUNCTION (p. 58) is ON, the input to the KEYBOARD IN will be handled as messages for the LOWER PART, and the input to PEDAL IN will be handled as messages for the PEDAL PART.

●Control Change

❍Modulation (Controller number 1)

Status

2nd byte

3rd byte

BnH

01H

vvH

n = MIDI channel number :

0H - FH (ch.1 - ch.16)

vv = modulation depth :

00H - 7FH (0 - 127)

*Received only for the Other Tones Part.

❍Data Entry (Controller Number 6, 38)

Status

2nd byte

3rd byte

BnH

06H

mmH

BnH

26H

llH

n = MIDI channel number :

0H - FH (ch.1 - ch.16)

mm,ll = the value of the parameter specified by RPN/NRPN mm = upper byte (MSB), ll = lower byte (LSB)

❍Volume (Controller number 7)

Status

2nd byte

3rd byte

BnH

07H

vvH

n = MIDI channel number :

0H - FH (ch.1 - ch.16)

vv = volume :

 

00H - 7FH (0 - 127)

*Received only for the Other Tones Part.

❍Panpot (Controller number 10)

Status

2nd byte

3rd byte

BnH

0AH

vvH

n = MIDI channel number:

0H-FH (ch.1-ch.16)

vv = panpot:

 

00H-40H-7FH (Left-Center-Right)

*Received only for the Other Tones Part.

❍General Purpose Controller 2 (Controller number 17) (Wheel Brake)

Status

2nd byte

3rd byte

BnH

11H

vvH

n = MIDI channel number:

0H - FH (ch.1 - ch.16)

vv = control value :

 

00H - 7FH (0 - 127) 0-63 = OFF, 64-127 = ON

*When SUB KEYBOARD FUNCTION (p. 58) is OFF, this is received on the channel specified for CONTROL MIDI CH. (p. 54) (factory setting: channel 1).

*Not received by the Other Tones part.

*Not received when MIDI GENERAL CONTROLLERS SWITCH (p. 53) is OFF.

❍Hold 1 (Controller number 64)

Status

2nd byte

3rd byte

BnH

40H

vvH

n = MIDI channel number :

0H - FH (ch.1 - ch.16)

vv = control value :

 

00H - 7FH (0 - 127) 0-63 = OFF, 64-127 = ON

*When the SUB KEYBOARD FUNCTION (p. 58) is ON, this has same function as a hold pedal connected to the VK-8’s HOLD PEDAL jack.

❍Sound Controller 1-9 (Controller number 70-78) (Harmonic Bars)

Status

2nd byte

3rd byte

BnH

ccH

vvH

 

n = MIDI channel number :

0H - FH (ch.1 - ch.16)

cc = control change number :

46H

- 4EH (70-78)

vv = control value :

 

00H

- 7FH (0 - 127)

*Receives harmonic bar values.

*Not received by the Other Tones part.

*When the SUB KEYBOARD FUNCTION (p. 58) is ON, the input to the KEYBOARD IN will be handled as messages for the LOWER PART, and the input to PEDAL IN will be handled as messages for the PEDAL PART.

*Not received when MIDI SOUND CONTROLLERS SWITCH (p. 53) is OFF.

cc

H.Bar Feet

----------

+-------------------------------------

46H

16’

47H

5

1/3’

48H

8’

 

49H

4’

 

4AH

2 1/3’

4BH

2’

 

4CH

1 3/5’

4DH

1 1/3’

4EH

1’

 

*Control values and harmonic bars are related as follows.

 

vv

H.Bar Level

-------------

+---------------------------------

00H

- 0EH

0

0FH - 1CH

1

1DH - 2AH

2

2BH - 38H

3

39H

- 47H

4

48H

- 55H

5

56H

- 63H

6

64H

- 71H

7

72H

- 7FH

8

❍General Purpose Controller 5 (Controller number 80) (Rotary Speed)

Status

2nd byte

3rd byte

BnH

50H

vvH

n = MIDI channel number:

0H - FH (ch.1 - ch.16)

vv = control value:

 

00H - 7FH (0 - 127)

*When SUB KEYBOARD FUNCTION is OFF (p. 58), this is received on the channel specified for CONTROL MIDI CH. (p. 54) (factory setting: channel 1).

*Not received when MIDI GENERAL CONTROLLERS SWITCH (p. 53) is OFF.

71

Page 70 Page 72
Image 71
Page 70 Page 72
Contents Dark blink Conventions Used in This ManualImportant Safety Instructions Page Using the Unit Safely Important Notes Contents Troubleshooting Memo Main Features Panel Descriptions Lower button 19 -8 buttonOther Tones Level knob Pedal buttonRotary Tone Cabinet connector Power switchMidi Keyboard in connector Midi Pedal in connectorHow the Organ Sound are Created How the VK-8 WorksAbout the Virtual Tonewheel Sound Generator Amp Type Rotary, Overdrive, Tone How the Other Tones are CreatedVibrato and Chorus Harmonic barsSystem memory Preset memoryAbout the Memories Before You Begin Playing Connecting the Power CordTRS Connecting Your Amp, Speakers, or HeadphonesConnecting an Expression Pedal or Pedal Switch Connecting the Pedal KeyboardBefore You Begin Playing Restoring the Factory Settings Factory Reset Demo Song Song Name Copyright Number Press the Preset button to make its indicator lightListening to the Demo Songs Press the Split buttonPlay the keyboard to hear the sound you selected Playing the OrganListening to Various Sounds Button Part Press the H-BAR Manual button to make its indicator lightAbout the Organ Voice Move the harmonic bars to edit the sound pAdjusting the Sound in Real Time Harmonic Bars 5th Root 8th 12th 15th 17th 19th 22nd Below Playing the Organ What Are Feet? Turn the Leakage knob Changing the Organ Sound Wheel Type, Leakage LevelTone Wheel type Leakage NoiseThird Third Percussion button Adding Crispness to the Sound PercussionSecond Second Percussion button Soft Soft Percussion button Fast Percussion Slow Slow Percussion buttonC-2, C-3 Adding Modulation to the Sound Vibrato and ChorusRotary on button Using the Cosm Rotary Speaker Effect Rotary SoundSLOW/FAST button Brake buttonChanging Sound Characters Changing the Amp Type Amp Type Overdrive, ToneChanging the virtual amp Adding distortion to the sound-OverdrivePress D Beam on button to make its indicator light Using the D Beam Controller to Produce Common Organ EffectsSpring Reverb Shock Giving the sound a metallic character Ring ModulatorStopping the rotation of the tone wheels Wheel Brake Manually adjusting the sensitivity of the D Beam controller Adjusting the Sensitivity of the D Beam ControllerChanging the Reverb Type Press the Reverb button to switch the reverb typesAdding Ambience Reverb Lower Part Upper Part Press the Split button to make its indicator lightDividing the Keyboard Split Changing the Split PointApplying the Active Expression Function to the Other Tones Using the Expression PedalUsing the Active Expression Function Applying the Active Expression Function to the Organ VoiceRotary SLOW/FAST Using a Control PedalPreset button’s indicator is dark Button Parameter Assigning a Function to the Control PedalOther Tones Preset UPOther Tones Glide OverdriveUsing the Hold Pedal to Sustain the Sound Button Tone Turn the Other Tones Level knob to adjust the volumePlaying Other Tones Layering Other Tones with Organ Sounds LayerPlaying Other Tones Preset contains the following settings Saving Your Settings PresetSelecting the copy-source preset Saving to a Preset in the Same BankSaving to a Preset in Another Bank Copying a presetAbout the Edit Modes Basic ProcedureAdvanced Use Advanced Use If the setting is an on or OFF switchPreset button’s indicator lighted Button Parameter Rotary-related SettingsPreset button’s indicator extinguished Button Parameter Rotary Woofer Level On Click Level Click Noise and Percussion SettingsWhen setting things other than the Midi channel MIDI-related SettingsOFF Connecting/disconnecting the sound generator and keyboardAdding Midi Thru functionality to the Midi OUT connector Setting ExplanationDrum Midi CH. Drum Midi Channel Initial setting 10 ch When making Midi channel settingsEQ Treble -5-0-+5 Equalizer and Other SettingsEQ Bass -5-0-+5 EQ Middle -5-0-+5Transposing the entire VK-8 KEY Transpose -6-0-+5 Effect and Other SettingsSwitching the polarity of the control pedal Switching the polarity of the Hold pedalContinuous Reverb TimeSelecting the part that will play the Other Tones SLOW/FASTKeyboard Changing the function of the Midi in connectors SUBAbout Midi About Midi ChannelConnecting a Pedal Keyboard Using the VK-8 with a Dual KeyboardPlay back your performance Carry out the recordingSequencer Save the settingsLoading Back Data That’s Been Saved on an ExternalPin No Output data Connecting a Rotary SpeakerTroubleshooting Pitch is incorrect Problem Check SolutionClick is heard when you press/re Lease a keyCan’t hear spring shock noise Preset memory contents are lostMidi messages are not transmit Ted/receive correctlyDuring normal operation Error IndicationsWhen you turn on the power All indicators light for several secondsPreset List Preset/OTHER Tones ListButton’s Number Tone Other Tones ListEdit Parameters Settings that are saved for the entire SystemParameters that are stored in a preset Drum List Control Change Midi ImplementationChannel Voice Messages Note off Active Sensing Reset All Controllers Controller numberAll Sound Off Controller number All Note Off Controller numberData Set 1 DT1 Data Request 1 RQ1DT1 Identity ReplyData Set1 System Organ Midi Implementation Supplementary material How to calculate the checksumMidi Implementation Chart Main Specification Bank IndexIndex Memo Information Avis 02896667 ’03-6-3N
Top Page Image Contents