Roland VK-8 Loading Back Data That’s Been, Saved on an External, Sequencer, Save the settings

Page 61
Connecting the VK-8 to External Devices

Saving VK-8 Settings on an

Save the settings

External Sequencer (Bulk

5.

Hold down the HARMONIC BAR PART

Dump)

 

[UPPER][LOWER][PEDAL] buttons, and press the

 

ROTARY SOUND [BRAKE] button.

 

 

You can connect the VK-8 to an external sequencer, then save

 

The [VIBRATO AND CHORUS] button’s indicator will

VK-8 presets, and system settings on it. This function is

 

 

blink.

called “bulk dump.”

 

6.

Start recording on your sequencer.

Connect the VK-8 to your sequencer

7.

Press the [VIBRATO AND CHORUS] button to begin

1. Make sure that the power of the VK-8 and your

 

saving the settings.

sequencer is off.

 

 

While the settings are being saved, the D BEAM type

 

 

NOTE

 

indicators will light in succession, starting from the

Turn off the power of the VK-8 and the other device before

 

bottom.

 

 

making connections. If you connect an external device when the

 

When the save has been completed, all indicators of the

power is turned on, damage or malfunctions may occur.

 

D Beam Type will blink.

2. Use commercially-available MIDI cables to connect the

8.

Press the ROTARY SOUND [BRAKE] button.

VK-8 to your sequencer.

9.

Stop recording on your sequencer.

 

■ Loading Back Data That’s Been

 

 

Saved on an External

 

 

Sequencer

 

1. Make sure that the power of the VK-8 and your

 

 

sequencer is off.

 

NOTE

 

 

Turn off the power of the VK-8 and the other device before

 

 

making connections. If you connect an external device when the

 

 

power is turned on, damage or malfunctions may occur.

IN

2. Use commercially-available MIDI cables to connect the

 

VK-8 to your sequencer.

 

 

 

 

Connect the VK-8’s MIDI IN connector to the

 

 

sequencer’s MIDI OUT connector

 

3. Turn on the power of your sequencer and VK-8.

 

4. Play back your sequencer.

 

 

When the playback has been completed, all indicators of

• Connect the VK-8’s MIDI OUT connector to the

 

the VIBTATO AND CHORUS Type and VIBRATO AND

 

CHORUS [ON] button will blink.

sequencer’s MIDI IN connector

 

5. When the external sequencer has finished playing

3. Turn on the power of the external sequencer and the

 

 

VK-8.

 

back, press the VIBRATO AND CHORUS [ON]

 

button.

4. Turn off the Thru function of your sequencer.

 

 

The data from the external sequencer has thus been

 

 

 

 

loaded into the VK-8.

61

Page 60 Page 62
Image 61
Page 60 Page 62
Contents Dark blink Conventions Used in This ManualImportant Safety Instructions Page Using the Unit Safely Important Notes Contents Troubleshooting Memo Main Features Panel Descriptions Other Tones Level knob 19 -8 buttonPedal button Lower buttonMidi Keyboard in connector Power switchMidi Pedal in connector Rotary Tone Cabinet connectorAbout the Virtual Tonewheel Sound Generator How the VK-8 WorksHow the Organ Sound are Created Vibrato and Chorus How the Other Tones are CreatedHarmonic bars Amp Type Rotary, Overdrive, ToneAbout the Memories Preset memorySystem memory Before You Begin Playing Connecting the Power CordTRS Connecting Your Amp, Speakers, or HeadphonesConnecting an Expression Pedal or Pedal Switch Connecting the Pedal KeyboardBefore You Begin Playing Restoring the Factory Settings Factory Reset Listening to the Demo Songs Press the Preset button to make its indicator lightPress the Split button Demo Song Song Name Copyright NumberListening to Various Sounds Playing the OrganPlay the keyboard to hear the sound you selected About the Organ Voice Press the H-BAR Manual button to make its indicator lightMove the harmonic bars to edit the sound p Button PartAdjusting the Sound in Real Time Harmonic Bars 5th Root 8th 12th 15th 17th 19th 22nd Below Playing the Organ What Are Feet? Tone Wheel type Changing the Organ Sound Wheel Type, Leakage LevelLeakage Noise Turn the Leakage knobSecond Second Percussion button Adding Crispness to the Sound PercussionThird Third Percussion button Soft Soft Percussion button Fast Percussion Slow Slow Percussion buttonC-2, C-3 Adding Modulation to the Sound Vibrato and ChorusSLOW/FAST button Using the Cosm Rotary Speaker Effect Rotary SoundBrake button Rotary on buttonChanging the virtual amp Changing the Amp Type Amp Type Overdrive, ToneAdding distortion to the sound-Overdrive Changing Sound CharactersPress D Beam on button to make its indicator light Using the D Beam Controller to Produce Common Organ EffectsStopping the rotation of the tone wheels Wheel Brake Giving the sound a metallic character Ring ModulatorSpring Reverb Shock Manually adjusting the sensitivity of the D Beam controller Adjusting the Sensitivity of the D Beam ControllerAdding Ambience Reverb Press the Reverb button to switch the reverb typesChanging the Reverb Type Dividing the Keyboard Split Press the Split button to make its indicator lightChanging the Split Point Lower Part Upper PartUsing the Active Expression Function Using the Expression PedalApplying the Active Expression Function to the Organ Voice Applying the Active Expression Function to the Other TonesPreset button’s indicator is dark Button Parameter Using a Control PedalAssigning a Function to the Control Pedal Rotary SLOW/FASTOther Tones Glide Preset UPOverdrive Other TonesUsing the Hold Pedal to Sustain the Sound Playing Other Tones Turn the Other Tones Level knob to adjust the volumeLayering Other Tones with Organ Sounds Layer Button TonePlaying Other Tones Preset contains the following settings Saving Your Settings PresetSaving to a Preset in Another Bank Saving to a Preset in the Same BankCopying a preset Selecting the copy-source presetAdvanced Use Basic ProcedureAbout the Edit Modes Advanced Use If the setting is an on or OFF switchPreset button’s indicator extinguished Button Parameter Rotary-related SettingsPreset button’s indicator lighted Button Parameter Rotary Woofer Level On Click Level Click Noise and Percussion SettingsWhen setting things other than the Midi channel MIDI-related SettingsAdding Midi Thru functionality to the Midi OUT connector Connecting/disconnecting the sound generator and keyboardSetting Explanation OFFDrum Midi CH. Drum Midi Channel Initial setting 10 ch When making Midi channel settingsEQ Bass -5-0-+5 Equalizer and Other SettingsEQ Middle -5-0-+5 EQ Treble -5-0-+5Switching the polarity of the control pedal Effect and Other SettingsSwitching the polarity of the Hold pedal Transposing the entire VK-8 KEY Transpose -6-0-+5Selecting the part that will play the Other Tones Reverb TimeSLOW/FAST ContinuousAbout Midi Changing the function of the Midi in connectors SUBAbout Midi Channel KeyboardConnecting a Pedal Keyboard Using the VK-8 with a Dual KeyboardPlay back your performance Carry out the recordingLoading Back Data That’s Been Save the settingsSaved on an External SequencerPin No Output data Connecting a Rotary SpeakerTroubleshooting Click is heard when you press/re Problem Check SolutionLease a key Pitch is incorrectMidi messages are not transmit Preset memory contents are lostTed/receive correctly Can’t hear spring shock noiseWhen you turn on the power Error IndicationsAll indicators light for several seconds During normal operationPreset List Preset/OTHER Tones ListButton’s Number Tone Other Tones ListParameters that are stored in a preset Settings that are saved for the entire SystemEdit Parameters Drum List Channel Voice Messages Note off Midi ImplementationControl Change All Sound Off Controller number Reset All Controllers Controller numberAll Note Off Controller number Active SensingData Set 1 DT1 Data Request 1 RQ1Data Set1 Identity ReplyDT1 System Organ Midi Implementation Supplementary material How to calculate the checksumMidi Implementation Chart Main Specification Bank IndexIndex Memo Information Avis 02896667 ’03-6-3N
Top Page Image Contents