Contents |
|
Conventions Used in This Manual | 1 |
USING THE UNIT SAFELY | 3 |
IMPORTANT NOTES | 5 |
Main Features | 9 |
Panel Descriptions | 10 |
How the | 13 |
About the Virtual Tonewheel Sound Generator | 13 |
How the Organ Sound are Created | 13 |
How the Other Tones are Created | 14 |
About the Memories | 15 |
Before You Begin Playing | 16 |
Connecting the Power Cord | 16 |
Connecting Your Amp, Speakers, or Headphones | 17 |
Connecting the Pedal Keyboard | 18 |
Connecting an Expression Pedal or Pedal Switch | 18 |
Turning the Power On | 19 |
Turning Off the Power | 19 |
Restoring the Factory Settings (Factory Reset) | 20 |
Listening to the Demo Songs | 21 |
Playing the Organ | 22 |
Listening to Various Sounds | 22 |
About the Organ Voice | 23 |
Adjusting the Sound in Real Time (Harmonic Bars) | 24 |
Changing the Organ Sound (Wheel Type, Leakage Level) | 27 |
Adding Crispness to the Sound (Percussion) | 28 |
Adding Modulation to the Sound (Vibrato and Chorus) | 31 |
Using the COSM Rotary Speaker Effect (Rotary Sound) | 32 |
Changing the Amp Type (Amp Type, Overdrive, Tone) | 33 |
Using the D BEAM Controller to Produce Common Organ Effects | 34 |
Adjusting the Sensitivity of the D Beam Controller | 36 |
Adding Ambience (Reverb) | 37 |
Dividing the Keyboard (Split) | 38 |
Changing the Split Point | 38 |
Using the Expression Pedal | 39 |
Using the Active Expression Function | 39 |
Using a Control Pedal | 40 |
Assigning a Function to the Control Pedal | 40 |
Using the Hold Pedal to Sustain the Sound | 42 |
Playing Other Tones | 43 |
Layering Other Tones with Organ Sounds (Layer) | 43 |
Assigning Organ Sounds and Other Tones Across the Keyboard (Split) | 44 |
Saving Your Settings (Preset) | 45 |
Saving to a Preset in the Same Bank | 46 |
Saving to a Preset in Another Bank | 46 |
Copying a preset | 46 |
6