Roland VK-8 owner manual Carry out the recording, Play back your performance

Page 60

Connecting the VK-8 to External Devices

Using an External Sequencer to Record and Play Back

You can connect a sequencer to the VK-8 and record your playing. The sequencer will store your performance on the VK-8 as various types of MIDI data. MIDI data that is received can be sent from the sequencer back to the VK-8 to reproduce your performance.

→Some sequencers are able to record settings such as the VK-8’s presets, OTHER TONES settings, and system settings.

Making preparations for recording

1.Make sure that the power of the VK-8 and your sequencer is turned off.

NOTE

Turn off the power of the VK-8 and the other device before making connections. If you connect an external device when the power is turned on, damage or malfunctions may occur.

2.Use commercially-available MIDI cables to connect the VK-8 to your sequencer.

IN OUT

•Connect the VK-8’s MIDI OUT connector to the sequencer’s MIDI IN connector

•Connect the VK-8’s MIDI KEYBOARD IN or MIDI PEDAL IN connector to the sequencer’s MIDI OUT connector

3.Turn on the power of the external sequencer and the VK-8.

4.Turn off the Thru function of your sequencer.

This allows you to listen to the sound while you record. Turn off Thru function so every note doesn’t get sounded twice—once as the result of the performance data that directly conveys keyboard information to the organ voice or other tone, and a second time by the performance data returned via the Thru function of your sequencer.

NOTE

For details on setting the Thru function of your sequencer, refer

to the owner’s manual of your sequencer.

5.Turn off the SUB KEYBOARD FUNCTION (p. 58).

Carry out the recording

When you have finished making preparations for recording, start recording on your sequencer and record your performance.

6.Start recording on your sequencer.

7.Adjust the harmonic bars or select other tones if desired, and play the organ.

8.When you are finished playing, stop recording on your sequencer.

Play back your performance

9.Play back your sequencer, and your performance will be played back.

60

Image 60

Contents Conventions Used in This Manual Dark blinkImportant Safety Instructions Page Using the Unit Safely Important Notes Contents Troubleshooting Memo Main Features Panel Descriptions 19 -8 button Other Tones Level knobPedal button Lower buttonPower switch Midi Keyboard in connectorMidi Pedal in connector Rotary Tone Cabinet connectorHow the VK-8 Works About the Virtual Tonewheel Sound GeneratorHow the Organ Sound are Created How the Other Tones are Created Vibrato and ChorusHarmonic bars Amp Type Rotary, Overdrive, TonePreset memory About the MemoriesSystem memory Connecting the Power Cord Before You Begin PlayingConnecting Your Amp, Speakers, or Headphones TRSConnecting the Pedal Keyboard Connecting an Expression Pedal or Pedal SwitchBefore You Begin Playing Restoring the Factory Settings Factory Reset Press the Preset button to make its indicator light Listening to the Demo SongsPress the Split button Demo Song Song Name Copyright NumberPlaying the Organ Listening to Various SoundsPlay the keyboard to hear the sound you selected Press the H-BAR Manual button to make its indicator light About the Organ VoiceMove the harmonic bars to edit the sound p Button PartAdjusting the Sound in Real Time Harmonic Bars 5th Root 8th 12th 15th 17th 19th 22nd Below Playing the Organ What Are Feet? Changing the Organ Sound Wheel Type, Leakage Level Tone Wheel typeLeakage Noise Turn the Leakage knobAdding Crispness to the Sound Percussion Second Second Percussion buttonThird Third Percussion button Soft Soft Percussion button Slow Slow Percussion button Fast PercussionAdding Modulation to the Sound Vibrato and Chorus C-2, C-3Using the Cosm Rotary Speaker Effect Rotary Sound SLOW/FAST buttonBrake button Rotary on buttonChanging the Amp Type Amp Type Overdrive, Tone Changing the virtual ampAdding distortion to the sound-Overdrive Changing Sound CharactersUsing the D Beam Controller to Produce Common Organ Effects Press D Beam on button to make its indicator lightGiving the sound a metallic character Ring Modulator Stopping the rotation of the tone wheels Wheel BrakeSpring Reverb Shock Adjusting the Sensitivity of the D Beam Controller Manually adjusting the sensitivity of the D Beam controllerPress the Reverb button to switch the reverb types Adding Ambience ReverbChanging the Reverb Type Press the Split button to make its indicator light Dividing the Keyboard SplitChanging the Split Point Lower Part Upper PartUsing the Expression Pedal Using the Active Expression FunctionApplying the Active Expression Function to the Organ Voice Applying the Active Expression Function to the Other TonesUsing a Control Pedal Preset button’s indicator is dark Button ParameterAssigning a Function to the Control Pedal Rotary SLOW/FASTPreset UP Other Tones GlideOverdrive Other TonesUsing the Hold Pedal to Sustain the Sound Turn the Other Tones Level knob to adjust the volume Playing Other TonesLayering Other Tones with Organ Sounds Layer Button TonePlaying Other Tones Saving Your Settings Preset Preset contains the following settingsSaving to a Preset in the Same Bank Saving to a Preset in Another BankCopying a preset Selecting the copy-source presetBasic Procedure Advanced UseAbout the Edit Modes If the setting is an on or OFF switch Advanced UseRotary-related Settings Preset button’s indicator extinguished Button ParameterPreset button’s indicator lighted Button Parameter Rotary Woofer Level Click Noise and Percussion Settings On Click LevelMIDI-related Settings When setting things other than the Midi channelConnecting/disconnecting the sound generator and keyboard Adding Midi Thru functionality to the Midi OUT connectorSetting Explanation OFFWhen making Midi channel settings Drum Midi CH. Drum Midi Channel Initial setting 10 chEqualizer and Other Settings EQ Bass -5-0-+5EQ Middle -5-0-+5 EQ Treble -5-0-+5Effect and Other Settings Switching the polarity of the control pedalSwitching the polarity of the Hold pedal Transposing the entire VK-8 KEY Transpose -6-0-+5Reverb Time Selecting the part that will play the Other TonesSLOW/FAST ContinuousChanging the function of the Midi in connectors SUB About MidiAbout Midi Channel KeyboardUsing the VK-8 with a Dual Keyboard Connecting a Pedal KeyboardCarry out the recording Play back your performanceSave the settings Loading Back Data That’s BeenSaved on an External SequencerConnecting a Rotary Speaker Pin No Output dataTroubleshooting Problem Check Solution Click is heard when you press/reLease a key Pitch is incorrectPreset memory contents are lost Midi messages are not transmitTed/receive correctly Can’t hear spring shock noiseError Indications When you turn on the powerAll indicators light for several seconds During normal operationPreset/OTHER Tones List Preset ListOther Tones List Button’s Number ToneSettings that are saved for the entire System Parameters that are stored in a presetEdit Parameters Drum List Midi Implementation Channel Voice Messages Note offControl Change Reset All Controllers Controller number All Sound Off Controller numberAll Note Off Controller number Active SensingData Request 1 RQ1 Data Set 1 DT1Identity Reply Data Set1DT1 System Organ How to calculate the checksum Midi Implementation Supplementary materialMidi Implementation Chart Main Specification Index BankIndex Memo Information Avis 02896667 ’03-6-3N