iLive AP7141 manual Set your operating preferences, Surface / Preferences

Set your operating preferences

PAFL – Choose:

Additive or auto cancel mode when you press more than one PAFL key.

Options for the MIX and SEL keys to follow PAFL key presses. For example, pressing a single key can route the signal to the PAFL monitor, open its channel processing and present its mix and assignments on the strips.

PFL level trim balance relative levels between PFL and AFL.

Main mix to PAFL monitor level. Set to ‘-inf’ (off) to silence the monitor when no PAFL is selected.

Note – Input PAFL overrides Output (mix) PAFL overrides main mix.

SURFACE / Preferences

Use this screen to set your preferences to:

Link the fader Banks when you press the Layer keys.

Display dB values on the strip LCDs when you move faders and encoders.

Set momentary or latching TALK switch operation.

Enable the Scene Up/Down/GO recall keys near the faders.

Enable Scene edit confirmation popup screens to help prevent accidental overwriting of settings.

Choose the temperature display units in degree C or F. Show the peak frequency activity on the RTA display. Set the strip LCD contrast.

Note - To avoid accidental scene recall make sure Enable Scene Up/Down/Go is turned off unless you need to use the GO keys next to the faders, and turn on the Scene confirmation.

ALT VIEW key

Naming channels overwrites their channel numbers in the strip LCD displays. You can hold down the ALT VIEW key near the faders to temporarily view the numbers. Use the SURFACE / Alt View Setup screen to choose which information to display when ALT VIEW is pressed. You can select channel number, physical socket number or dB value.

You can also choose to access channel GAIN on the strip rotary controls while in ALT VIEW mode, and change the primary, shifted and alt functions.

FREEZE IN LAYERS key

You can temporarily 'freeze' (lock) a channel strip so that it remains in view when you switch through the fader layers. Hold down the FREEZE IN LAYERS key and press the strip MIX keys to freeze or unfreeze selected strips. The blue LEDs display which strips are frozen while the key is pressed.

iLive Fixed Format Getting Started Guide 13 AP7141 iss.2