iLive AP7141 Name and colour channels, Channel Processing view, Name & Colour screen, Quick Menu

Page 14

Step 4 – Name and colour channels

Having chosen a Template show as your starting point, and set your operating preferences, you may wish to prepare for your show by naming your inputs, mixes and DCAs, and applying colour to help identify them by type or to highlight important channels. You can name channels with up to 5 characters entered from an on-screen touch keyboard. You can colour each or ranges of channels with one of 6 colours or no colour. This colour is displayed as the backlight to each strip LCD.

There are two ways to name and colour channels:

Channel Processing view

In normal mixing mode, press SEL to access the channel processing. Make sure all screen keys are turned off so that the channel parameters are displayed on the screen. Navigate to the name and colour screen:

Input Channels - PREAMP screen Mix Masters - EXT INPUT screen DCA Masters – Top toolbar

Name & Colour screen

Press the TouchScreen NAME & COLOUR key.

Strip Select / Single Strip Select - Press a strip SEL key. Touch Name to open the on-screen keypad. Touch Colour to select a colour. Touch Apply.

Strip Select / Block Strip Select - Press the first SEL key then the last in the range you want to colour. All green SEL indicators in the range light. Touch Colour to select the colour. Touch Apply.

Note – Naming is disabled in Block mode, apart from resetting a block of names to their channel numbers.

Channel Select - Select Channel Type and the range. Select Colour and press Apply.

Note - To restore the SEL keys to normal mixing mode turn off the NAME & COLOUR key.

Touch Reset to delete the name and restore the channel number.

Quick Menu

A quick naming facility opens a second keypad to let you create and store up to 48x of your most often used names. To apply, press a strip SEL key and simply touch a name. Touch Edit to edit or create new names.

Note – The user defined quick names are stored in the Show memories. These get overwritten with the contents of the Show when it is recalled.

iLive Fixed Format Getting Started Guide

14

AP7141 iss.2

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Getting Started Guide Further information Safety InstructionsSystem operating firmware Table of Contents Systems Introduction ILive SeriesIDR-32 System componentsIDR-48 IDR-16IEC Series Control layoutPafl Copy/Paste/Reset edit keys ACE Connect and power upConnect Surface to MixRack Network settings Network PL-ANETStatus indicators Switch power onBoot up time Status screenLoad a Template Show Customise and save your settingsLoad a ‘Template Show’ as a starting point Recall the layout for your SurfaceDCA TouchScreenGP, FX, AUX, MTX Set your operating preferences Surface / PreferencesName & Colour screen Name and colour channelsChannel Processing view Quick MenuGEQ on faders Access the Preamp, EQ and dynamicsWork with the channel processing Work with the mix IEM2WDG1 WDG2 IEM1 IEM2 Routing screenWork with the FX Tap TempoUsing the SoftKeys for Mute Groups Using DCA groupsUsing DCAs to create Mute Groups Copy / Paste / Reset Channel GangingView and patch Output sockets Patch the socketsView and patch channel Input sockets Patching InsertsTo change the Fader Strip Layout Customise your configurationTo change the MIX BUS configuration User Profiles Save your settingsPower down memory LibrariesScene memories Show memories Monitor System Find out more about using the iLiveSystem example AUX Matrix Main
Top Page Image Contents