Step 6 – Work with the mix
SEL | Press a strip MIX key. |
| |
PAFL | The current mix status is displayed in the lower |
| |
| part of the strip LCDs. Mix sends are presented |
MUTE | on faders or encoders. The name of the current |
| mix selected is displayed in the lower status bar |
MIX | of the screen. |
Note – Make sure you are working with the correct mix. After making your adjustments remember to turn off the MIX key or return to your main mix. Turning off the MIX key automatically returns to the main mix.
There are two ways to work with the mix:
Master MIX view - All sends to one master | IP |
|
| |||||
|
|
|
|
|
| 4 |
| MASTER |
|
|
|
|
|
| PAN |
| STEREO |
| IP |
| IP | IP | IP | L | R | |
|
| LEV |
| AUX | ||||
| 1 |
| 2 | 3 | 4 | FADER |
| IEM2 |
|
|
|
|
|
| CH |
|
|
| PAN |
| PAN | PAN | PAN |
|
|
|
Current mix status | L | R L | R | L | R L | R |
|
|
AUX |
| AUX |
| AUX | AUX |
| CH | |
|
|
| PRE |
| PRE | PRE |
| |
ON = channel is |
|
|
| 5 | FADER | |||
|
|
|
|
|
| |||
|
|
|
|
|
|
| ||
assigned |
|
|
|
|
|
| ROTARY SHIFT |
|
PRE = Channel |
|
|
|
|
|
|
|
|
send is set pre- | SEL |
| SEL |
| SEL | SEL | PRE/POST FADE | SEL |
fader. |
|
|
| |||||
|
|
|
|
| 3 |
|
| |
|
|
|
|
|
|
|
|
MIX | MIX | MIX | MIX | ASSIGN | MIX |
|
|
| 2 |
| 1 |
|
|
| 4 | Mix sends (Aux, FX, Matrix) may be | |
|
|
| configured in the ROUTING screen as | ||
|
|
|
| fader or rotary sends. |
|
|
|
|
| Fader mix Faders = Sends |
|
|
|
|
| Encoders = Pan (if a stereo send) | |
|
|
|
| Rotary mix Faders = Channel (trim) | |
|
|
|
| Encoders = Sends |
|
|
|
|
| Shifted encoders = Pan |
|
1Press a master strip MIX key Its sources are presented across the channel strips.
2Assign channels to the master To assign individual channels, hold down the ASSIGN key then press channel MIX keys. To assign all, hold down ASSIGN then press the mix master MIX key. The ON icon displays in the LCD for assigned channels.
3 Set pre or post fader To set individual PRE/POST key and then press channel SEL keys. the mix master SEL key.
sends pre or
4Adjust the send levels Aux, FX and matrix mixes can be configured for sends on faders or rotaries. For groups and DCAs (no send levels), the assignments are displayed on the LCDs. The faders and encoders remain unaffected.
5Adjust the image Use the encoders to adjust Pan for stereo or multi output main mix type. Hold down ROTARY SHIFT and turn the encoders to adjust the second image control if one is available, for example LCRplus Blend, Sub or M fill level, or encoder mix Pan.
iLive Fixed Format Getting Started Guide | 16 | AP7141 iss.2 |