Teac WR-DA7 manual BRC setting BRC as the wordclock slave

Page 21

To accomplish MMC operation, the MIDI channel of the WR-DA7 and the MIDI channel of the BRC must be set to the same channel. On the BRC, obtain a display of 11: MIDI Device screen by MIDI/UTIL setting. Set the value of ‘MIDI channel set for the WR-DA7 - 1.’ Otherwise, the settings should be set to ‘ALL.’

BRC setting (BRC as the wordclock slave)

When using a BRC and ADAT with the DA7, it may be necessary to sync the BRC to the DA7’s inter- nal wordclock generator.

1.Connect a 75 ohm (BNC) wordclock cable from the DA7’s wordclock output to the BRC’s 48 kHz input.

2.Press the EDIT then EXTERNAL sync buttons on the BRC and using the arrow keys, select 48 kHz INPUT.

3.Press the EDIT button to go back to normal operation. Make sure the EXTERNAL sync button is enabled (the button lights green).

22

Image 21

Contents Application Guide Version Trademarks Table of Contents Introduction Wordclock Installing and using option cards with the WR-DA7WR-DA7 as wordclock master WR-DA7 as wordclock slaveTimecode WordclockTandem connection Connections ADAT, BRCOFF, SW2 OFF DA-98, 88Midi Digital timepiece DAT with AES/EBU or S/PDIF I/OExpansion Software Macintosh Version ConnectionMidi Page WR-DA7 setting Adat settingMethod of connection Adat System configuration-1Example of systems for Adat 3 units and BRC BRC setting System configuration-2 Method of connection BRC settingBRC as the wordclock master BRC setting BRC as the wordclock slave Adat ID2 System configuration-3Example of systems with 3 DA-88s DA-88 setting System configuration-4 Method of connection DA-98, 38 setting System configuration Example of systems for analog 16-track recorder 1 unit MTR Example of systems for Digital Video Recorder 1 unit Digital Video Recorder Example of systems for VTR 1 unit, Adat 1 unit, and BRC BRC setting VTR Example of systems for VTR 1 unit and DA-98 1 unit DA-98 settingPage System configuration-9 Connecting Procedures WR-DA7 SetupSystem Example of Pro Tools ADAT, BRC Setup Pro Tools SetupPro Tools System Configuration-10System Example of Midi Sequencer Performer Midi Sequencer Performer Setup System Configuration-11 Connecting Procedures WR-DA7 Setup WR-DA7 Slave WR-DA7 MasterWR-DA7 System Configuration-12System Example of Akai DR8 1 unit DR8 SetupDR8 System Configuration-13PC Macintosh Setup Expansion Software SetupConnection to MAX Macintosh expansion software System Configuration-14 Midi Timepiece A/V Setup Midi Sequencer Digital Performer Setup Macintosh SetupSystem Configuration-15 Tandem-Connection to MAX Macintosh expansion software Macintosh for Expansion Software Setup System Configuration-16 Connecting Procedures Macintosh for Midi Sequencer Setup Midi Sequencer Digital Performer Setup System Configuration-17