Teac WR-DA7 manual Example of systems for analog 16-track recorder 1 unit, Method of connection

3.6 Example of systems for analog 16-track recorder (1 unit)

This is an editing system that uses AUTOMATION. The SMPTE timecode is recorded in the 16th tape track of the analog 16-track recorder and the system works off this timecode.

Method of connection

Insert the option card WR-ADDA (Slot 1, 2) and WR-SMPTE in the WR-DA7 and firmly fasten them to the main body with the supplied screws.

Connect the IN/OUT terminal using the recommended cable(Part # DA/DB-XLR M-F: Available in the USA) of the WR-ADDA card of the WR-DA7 to the IN/OUT terminal of the analog 16-track recorder.

The timecode is supplied from channel 16 of the analog recorder to the (optional) SMPTE IN (XLR: 1,3-GND, 2-SIGNAL) of the WR-DA7.

WR-DA7 setting

Set the WR-DA7 to the wordclock master.

In the INPUT SET screen of D-I/O of the WR-DA7, set SOURCE SELECT to ‘INT 48k’ or ‘INT 44.1k.’

To display the SMPTE timecode being received at the SMPTE IN, set the TIME BASE to ‘SMPTE’ in the EXECUTE screen of the AUTOMATION window.

30