Teac WR-DA7 manual BRC setting

Page 17

During ADAT playback there will be no playback while ALL INPUT is ON. ALL INPUT must be turned OFF.

BRC setting

Select the Fixed Mode when the BRC is used as a word clock master and the sampling rate is set at 48kHz. Select the Variable Mode when the sampling rate is set at 44.1kHz. Press the PITCH DOWN switch to make setting at -147cent ( ‘44.1’ display).

For MTC setting, set MIDI in the GEN SYNC setting at ‘MTC’ and turn on the GEN SYNC switch.

For SMPTE setting set SMPTE in the GEN SYNC setting at ‘-10dB’ and turn on the GEN SYNC switch.

To obtain a timecode output from the BRC during FF/REW operations in the ADAT, obtain a display of 8: Output Rew/FF SMPTE & MTC: for ‘ON’ in MIDI/UTIL setting of the BRC.

To accomplish MMC operation, there must be coincidence of the MIDI channel between the WR- DA7 and the MMC’s MIDI channel of the BRC. On the BRC, obtain a display of 11: MIDI Device screen by MIDI/UTIL setting. Set the value of ‘MIDI channel set for the WR-DA7 - 1.’ Otherwise, set- ting should be set to ‘ALL.’

18

Image 17

Contents Application Guide Version Trademarks Table of Contents Introduction Wordclock Installing and using option cards with the WR-DA7WR-DA7 as wordclock master WR-DA7 as wordclock slaveTimecode WordclockTandem connection Connections ADAT, BRCOFF, SW2 OFF DA-98, 88Midi Digital timepiece DAT with AES/EBU or S/PDIF I/OExpansion Software Macintosh Version ConnectionMidi Page Method of connection WR-DA7 settingAdat setting Adat System configuration-1Example of systems for Adat 3 units and BRC BRC setting System configuration-2 Method of connection BRC settingBRC as the wordclock master BRC setting BRC as the wordclock slave Adat ID2 System configuration-3Example of systems with 3 DA-88s DA-88 setting System configuration-4 Method of connection DA-98, 38 setting System configuration Example of systems for analog 16-track recorder 1 unit MTR Example of systems for Digital Video Recorder 1 unit Digital Video Recorder Example of systems for VTR 1 unit, Adat 1 unit, and BRC BRC setting VTR Example of systems for VTR 1 unit and DA-98 1 unit DA-98 settingPage System configuration-9 System Example of Pro Tools Connecting ProceduresWR-DA7 Setup ADAT, BRC Setup Pro Tools SetupPro Tools System Configuration-10System Example of Midi Sequencer Performer Midi Sequencer Performer Setup System Configuration-11 Connecting Procedures WR-DA7 Setup WR-DA7 Slave WR-DA7 MasterWR-DA7 System Configuration-12System Example of Akai DR8 1 unit DR8 SetupDR8 System Configuration-13Connection to MAX Macintosh expansion software PC Macintosh SetupExpansion Software Setup System Configuration-14 Midi Timepiece A/V Setup Midi Sequencer Digital Performer Setup Macintosh SetupSystem Configuration-15 Tandem-Connection to MAX Macintosh expansion software Macintosh for Expansion Software Setup System Configuration-16 Connecting Procedures Macintosh for Midi Sequencer Setup Midi Sequencer Digital Performer Setup System Configuration-17