Peavey Understanding MIDI Channel Management for prp7 Keyboard

Page 21

MIDI Channel

pRP7 is able to transmit MIDI messages on up to three channels at the same time, depending on the type of Preset recalled (single, layer or split). In reception, pRP7 can receive on all 16 MIDI channels.

The MIDI function allows you to modify the MIDI transmission channels of the pRP7, used by the pRP7 to communicate with other MIDI devices through a MIDI cable.

The Midi Channel function does not play a reference note during the setting operation.

1.Press and hold the MIDI Channel function key (A7) and press the TEMPO/ DATA + button to increase the transmission channel by one unit.

The LCD display will show the new channel setting corresponding to the main sound.

The MIDI channels of the Layer and Split sections will increase by one unit automatically. For example, when the display shows the Channel 2 setting, the Layer and Split sections will correspond to channels 4 and 3 respectively.

Each time you press the TEMPO/DATA + button, the MIDI channel setting for the main sound increases by one unit.

2.Press and hold the MIDI Channel function key (A7) and press the TEMPO/ DATA – button to decrease the channel setting by one unit.

The LCD display will show the new channel setting correspond to the main sound. If you started with the setting made in point 2 above, the display will show channel 1 for the main sound.

As a result of this setting, the MIDI channel of the Layer and Split sections will be respectively set to channels 3 and 2.

Each time you press the TEMPO/DATA – button, the MIDI channel setting decreases by one unit.

Resetting to the default MIDI channel configuration

3.Hold down the MIDI Ch. function key (A7) and press both the TEMPO/ DATA + and – buttons at the same time.

The display will show the default setting (Channel 1).

Release the MIDI channel function key to escape the function and return to normal playing.

The setting remains memorized even after turning the instrument off.

17

Image 21
Contents Page General safety instructions Contents Appendix Introduction Front Panel Front and rear panelTouch Pedals Rear panelPlaying the pRP7 Pedal Connection Play using the Pitch/Modulation JoystickSelect a single demonstration song Listen to the Demo songsSelection buttons PRP7 PresetsPreset selection Change the Split point setting Activate Split modeControl section Realtime operationsAdd effects to the selected Preset Activate Layer modeChange the Volume Balance between two sounds LED of the Transpose b button remains on to indicate TransposeTouch Functions of the pRP7 Tune To raise the tuningMidi Channel Midi Local Midi Common channel Midi channels About MidiMidi messages transmitted and received by pRP7 As a Midi controlling device Midi ApplicationsAs a Slave device Midi Sequencer recordingRecording a song Recording StudioClick metronome Recording a new songSelect a sequence from the Song Library Song LibraryPanel Reset Technical specifications pRP7 TechnologyDamper Physical Model Index Appendix Page PRP7 Midi Sound table GM-GMX PRP7 Presets PRP7 Song Library Drumkit Tables Drumkit tables A6 Appendix Midi Implementation Chart Control Change on tracks Federal Communications Commission Generalmusic Code