Playing the pRP7

Connect the audio cables

The pRP7 does not incorporate an internal amplification system, there- fore you must either play using headphones or connect to a suitable external amplification system.

Connect the audio outputs to your amp. system (mixer, powered speakers, etc.) using audio cables with standard 1/4” jacks. Use RCA jacks to connect to domestic stereo units. For mono reproduction, connect to the Right/M jack.

Headphone jack

If you are not playing connected to an external amplfication system, plug a set of headphones into the Phones jack to play in total silence without disturbing others in the same room. Use a mini jack1/4” adapter for Walkman or MidiDisc headphone sets. The Phones jack is located on the rear connections panel.

Use the Volume control to adjust the Headphones volume.

Connect the power supply

Connect the Generalmusic power supply unit to the 12V. D.C. jack.

Turn the instrument on

To turn the pRP7 on, press the ON/OFF switch located on the rear connections panel.

After a short period, the instrument will be ready to play the Grand Piano preset. The LED of the Grand Piano Preset button will be on and the 3- digit LCD display will show a tempo setting as an indication that the instrument is on.

In this power up condition, you will be able to play a piano sound (GrandPiano) across the entire keyboard without carrying out other operations.

Adjust the overall volume

Use the VOLUME control knob to adjust the overall volume level.

Sliding the VOLUME control knob to the right will increase the overall volume, while sliding to the left will decrease it.

LED on