The CONTROL section
Realtime operations
The pRP7 operating system has been conceived to permit several simple and quick real time operations using the buttons of the CON- TROL section.
Activate Split mode
Starting from the Single Preset “GrandPiano”, you can easily split the keyboard by pressing the SPLIT button. This will divide the keyboard into separate left and right sections.
Ac. Bass | GrandPiano | > |
After pressing the SPLIT button (the LED turns on), the GrandPiano sound remains active on the right side of the split. An Acoustic Bass sound is automatically assigned on the left side of the split.
If you press the SPLIT button again, the LED will turn off and the keyboard returns to the previous mode with the GrandPiano sound active to play across the entire keyboard.
Change the Split point setting
The default setting of the Split point corresponds to F#3. You can quickly modify the setting to suit your requirements.
1. Press and hold down the SPLIT button.
Flashing 
The LED of the SPLIT button starts to flash and the display shows the current split point setting expressed as the MIDI note number (54 = F#3).
2.While still holding down the SPLIT button, press the note on the keyboard corresponding to the new split point required (B3 in the example).
The new split point is shown in the display as Midi note 59 (B3).
The setting remains memorized for all the Presets. It is not possible to assign a different Split point setting for each Preset.
10