Panasonic WJ-HD220 manual Alteration Detection Alter Detect, Disk End Mode Disk END Mode

Note: The recording rate may be sacrificed in the fol- lowing cases.

•Recording and playback/FTP access are carried out simultaneously.

•A multi-split screen is displayed.

•VMD (video motion detection) is enabled.

•A PC accesses the live images via the network.

8Alteration Detection (ALTER DETECT)

You can enable or disable the addition of alteration- detection signals in the JPEG data supplied to the net- work. The default is OFF.

ON: Detects alterations.

OFF: Does not detect.

Note: When set to ON, the data transmission rate on the network will slow down.

8Disk End Mode (DISK END MODE)

STOP: Stops recording until a mode other than [STOP] is selected.

CONTINUE: Old data is automatically overwritten from the disk start.

8Disk End Buzzer (DISK END BUZZER)

ON: Enables the buzzer beep at the disk end (remain- ing space = 0 %).

OFF: Disables the buzzer beep.

8Play Priority (PLAY PRIORITY)

This setting places priority on a specific access point for playing back the image data when access collisions take place.

LOCAL: Places priority on front panel operations.

NET PLAY: Places priority on network access.

FTP GET: Places priority on access to the FTP.

NONE: The latest operation has priority over others.

8Time Adjusting (TIME ADJUSTING)

The internal timer built into the WJ-HD220 is calibrated once a day via the Time Adjust In and Out terminals on the rear panel.

SLAVE: Accepts the calibration signal from the master.

MASTER: Supplies the calibration signal to the slave units at the specified hour every day.

65