Panasonic WJ-HD220 manual Specifications

SPECIFICATIONS

General

Power Source Required:

Power Consumption:

Ambient Operating Temperature:

Ambient Operating Humidity:

Dimensions:

Weight:

Input

Video Input:

Audio Input:

Image Process

Compression System:

Pixel Rate:

Refresh Rate:

Output

Video Output:

Video Output Front Panel:

Audio Output:

Audio Output Front Panel:

Spot Monitor Output:

Multiscreen Monitor Output:

Control Port

Alarm/Remote Port:

RS-485 (PS• Data): RS-232C: 10/100BASE-TX Port:

120 V AC, 60 Hz

45 W

+5 °C - +45 °C (41 °F - 113 °F) Less than 85 %

420 mm (W) x 44 mm (H) x 350 mm (D) 16-9/16" (W) x 3-7/16" (H) x 13-3/4" (D)

5.2kg (11.4 lbs.)

1.0V[p-p]/75 Ω Composite video signal with 75 Ω Automatic Termination / Looping

through (x8)

–10 dB 10 kΩ unbalanced, RCA standard jack

JPEG

720 x 240 (Effective pixels 672 x 224)

30 FPS maximum

1.0V[p-p]/75 Ω Composite video signal/Looping through (x8)

1.0V[p-p]/75 Ω Composite video signal (x1)

–10 dB 600 Ω unbalanced, RCA standard jack (x1)

–10 dB 600 Ω unbalanced, RCA standard jack (x1)

1.0V[p-p]/75 Ω Composite video signal (x1)

1.0V[p-p]/75 Ω Composite video signal (x1)

25-pin Full Pitch D-sub connector (x1)

Alarm Input 1-8, Alarm Reset Input, EXT REC Input, Time Adjust Input, Sequence Input: Low-active, Non-voltage N.O. Contact, ≥100 ms

Alarm Recovery Output 1, Disk End Status Output, Time Adjust Output,

Warning Output, REC Status Output, Sequence Output: Low-active, Open-collector, 24 VDC 100 mA max.

Alarm Output 1, Play Status Output: Low-active, Open-collector, 12 VDC 100 mA max.

Alarm Output 2: High-active, 12 V 4.7 kΩ

Alarm Recovery Output 2: High-active, 12 V DC 220 Ω 6-conductor modular jack (RJ-11)

9-pin Full Pitch D-sub connector

10Base-T and 100Base-TX, 8-conductor modular jack (RJ-45) Protocol Installed: TCP/IP, HTTP, FTP, SMTP, SNMP, DNS, DDNS Security: Password-protected

Weight and dimensions shown are approximate. Specifications are subject to change without notice.

86