■Main Menu (WJ-HD220 MAIN MENU)
The main menu is located at the top of the menu tree from where every menu window starts.
TIMER |
| OFF |
REC SETUPO |
| |
EXT REC | SETUPO |
|
DISPLAY SETUPO |
| |
SYSTEM SETUPO |
| |
ALARM SETUPO |
| |
COMMUNICATION SETUPO | ||
SWITCHER SETUPO |
| |
SYSTEM INFORMATIONO | ||
LANGUAGE |
| ENGLISH |
1.Hold down the [SETUP/ESC] button for 2 seconds. The main menu appears.
2.Select a setup menu you wish to program using the [D] or [C] button, and press the [SET] (JogDial).
The selected setup menu opens. The following pages will detail each setup menu.
■Timer Recording Setup (TIMER REC)
This menu assigns a timer to start recording by use of an external timer or the internal timer. When the internal timer (INT) is set, there are four programs assignable to the weekly and/or daily schedule. Each program can contain up to four events along with start and end time, and record-
When the external timer (EXT) is set and the connected timer switch turns on to supply power, the recorder will start
1.Select a timer mode using the JogDial.
OFF: Does not use any timer, and manual recording is available.
INT: Carries out internal timer recording according to the program.
EXT: Carries out
2.Press the JogDial to validate the selection. When INT is selected, the TIMER REC menu opens.
TIMER REC
PROGRAM
SUNDAY PROG1O
MONDAY
TUESDAY
WEDNESDAY
THURSDAY
FRIDAY
SATURDAY
DAILY
3.Move the cursor to the desired line using the [D] or [C] button.
4.Select any parameter from PROG1 to PROG4 using the JogDial, and press the JogDial. The
●Program "1-4" Setup (PROG1-4
SETUP)
|
| PROG1 SETUP | |||||||||
NO. START END | MODE | ||||||||||
1→ | 8:00 | 12:20 | SETO | ||||||||
2→ 13:00 | 15:00 | SETO | |||||||||
3→ |
| : |
|
|
|
| : |
|
|
|
|
|
|
|
|
|
| ||||||
4→ |
| : |
|
|
|
| : |
|
|
|
|
|
|
|
|
|
| ||||||
1.Select the event number with the [D] or [C] button, and press the JogDial. The cursor moves to the START position.
After this operation, the [D] and [C] buttons move the cursor to the right and left.
2.Select a start time (START) using the JogDIal, and press the [D] button to move to the next position.
Available START times: From 0:00 to 23:59 in the 24- hour system.
3.Select an end time (END) in the same way as above and press the [D] button to move the cursor to the MODE position.
Available END times: From 0:00 to 24:00 in the 24- hour system.
Notes: There are some restrictions on programming.
•An event, except the first event (NO 1), can be pro- grammed only if the immediately preceding event has been set up.
•The start time should be later than the end time of the immediately preceding event.
•The end time should be later than the start time of the event.
•An end time set at 24:00 will cancel all following events.
•When you set both the start and end time of an event to the same hour, the event will not be record- ed.
•When planning to record all day long, set the start time to 00:00 and the end time to 24:00 for the final event.
•When planning to record through midnight:
Set 24:00 for the end time of the final event of the day.
25
