Panasonic WJ-HD220 Setup Procedures, Prior to Setup, Turning On the Power, Turning Off the Power

SETUP PROCEDURES

■Prior to Setup

●Turning On the Power

1.Plug the power cord into the AC outlet.

2.Turn on the power switch on the rear panel. The oper- ate LED lights up. An HDD check and a system check will be carried out while displaying respective mes- sages.

Power-on recording will start if TIMER has been set to EXT in the SYSTEM SETUP menu.

●Turning Off the Power

1.Press the [STOP] button when playing back, or [REC STOP] button when recording. Confirm that the HDD access indicator has turned off.

2.Turn off the power switch on the rear panel. The oper- ate LED goes off.

3.Press the [REC STOP] button to stop power-on record- ing, if applicable.

				PUSH—	PAUSE SET
HDD	STOP	PLAY	REC	REC STOP
SETUP
/ESC
FULL	ALARM			TIME&DATE
	SERCH			SEARCH
ERROR				ALARM
				RECALL
	PLAY MODE SELECT			Digital Disk Recorder WJ-HD220

POWER

ON SIGNAL GND

OFF

ALARM

SUSPEND

OPERATE

RESET

Confirm that the HDD access indicator is off.

HDD	SETUP	STOP	PLAY	REC	REC STOP
	/ESC
FULL
	ALARM				TIME&DATE
	SERCH				SEARCH

ERROR	AL
	RE
	PLAY MODE SELECT

4. Hold down the buttons of [LOCK] and [RESET] simulta- neously to suspend alarm inputs. The SUSPEND indica- tor will light up. This will prevent your setting operations from being interrupted by alarm inputs.

POWER

ON SIGNAL GND

OFF

ALARM	TIMER	DST	SP
			MU
SUSPEND	REMOTE

OPERATE

RESET LOCK OSD SEQUE

Notes:

Note: Refer to Power-on Procedures in the Appendix for details.

•Do not turn off the power while the HDD access indicator is on.

•Do not leave the recorder turned off for a long time. Supply AC power to the unit and turn it on to charge up the backup battery.

21