Panasonic WJ-HD220 manual Password Lock Setup Password Lock, Keylock Buzzer Setup Keylock Buzz

●Password Lock Setup (PASSWORD LOCK)

A five-digit password is entered to protect all settings, recorded pictures, and operating status against erroneous operation and tampering. Settings alone can be also pro- tected from unauthorized access. While the LOCK indicator on the front panel is on, a message "NOW KEY LOCKED!" is displayed to warn unauthorized operators. If accessed in this condition, the buzzer beeps.

7.Repeat steps 5 and 6 until all digits are entered.

8.Press the [SETUP/ESC] button to confirm the entered password.

Go back to step 3 if you have not yet set the OPERA- TION password.

●Keylock Buzzer Setup (KEYLOCK BUZZ)

		ALARM	TIMER	DST		SYSTEM SETUP (1 OF 2)
		SUSPEND REMOTE				PASSWORD LOCK	OFF
	OPERATE
		RESET	LOCK	OSD	SE	ALL→	*****
						OPERATION→	*****
						KEYLOCK BUZZ	ON
						SKIP ALM-RECALL	1PAGE
						SIMUL REC&PLAY	ON
						ALTER DETECT	OFF
	SYSTEM SETUP			(1	OF 2)	DISK END MODE	CONTINUE
						DISK END BUZZ	ON
	PASSWORD LOCK			OFF
	ALL→			*****
	OPERATION→			*****
	KEYLOCK BUZZ			ON		1. Move the cursor to KEYLOCK BUZZ with the [D] or [C]
	SKIP ALM-RECALL			1PAGE
	SIMUL REC&PLAY			ON		button.
	ALTER DETECT			OFF
	DISK END MODE			CONTINUE
	DISK END BUZZ			ON		2. Select either ON or OFF with the JogDial, and press the
						JogDial.
						The default is ON.
1. Move the cursor to PASSWORD LOCK with the [D] or
[C] button.						ON: Buzzer beeps when unauthorized access takes
						place.
2. Select either ON or OFF with the JogDial, and press the						OFF: Buzzer does not sound.
JogDial.
The default is OFF.

ON: The buttons are password protected. The recorder enters the button lock mode if neither a button nor the JogDial is operated within a period of five min- utes.

OFF: No password protection is applied.

3.Move the cursor to ALL→ or OPERATION→ with the [D] or [C] button.

ALL: Allows both normal operations and setup opera- tions.

OPERATION: Allows only normal operations. Setup operations are not allowed.

4.Press the JogDial.

The preset password appears.

The default is "12345" for both ALL and OPERATION.

<New password setting>

5.Select a digit, rotating the JogDial.

6.Enter a number with the numeric button, and press the JogDial.

The cursor moves one digit to the right.

●Skip Alarm Recall Setup

(SKIP ALARM RECALL)

Alarm log pages are recalled on the monitor when the JogDial is pressed for 2 seconds. When searching in the log, you may need to skip pages. The page will skip the specified number forward or backward from the displayed page when rotating the JogDial.

SYSTEM SETUP	(1 OF 2)
PASSWORD LOCK	OFF
ALL→	*****
OPERATION→	*****
KEYLOCK BUZZ	ON
SKIP ALM-RECALL	1PAGE
SIMUL REC&PLAY	ON
ALTER DETECT	OFF
DISK END MODE	CONTINUE
DISK END BUZZ	ON

1.Move the cursor to SKIP ALM RECALL with the [D] or [C] button, and press the JogDial.

2.Select the number of skip pages with the JogDial, and press the JogDial.

The default is 1 page.

Available skip pages: 1, 5, 10, 20, 50 pages

32