4.To return to the
●To Search for Playback
1.Move the cursor to the desired event in the list, using the [D] or [C] button.
2.Press the [PLAY] button to play back the recorded pic- ture. The LED in the [PLAY] button lights up. The alarm log on the monitor disappears.
3.Press the [STOP] button to stop playback. The alarm log appears again on the monitor.
4.Hold down the JogDial for 2 seconds to quit the alarm log search.
●To Erase Log
All event records can be erased.
1.Move the cursor to "PUSH → DATA CLEAR", then press the JogDial.
2.Rotate the JogDial to select YES or NO.
YES: Enables the log erasure.
NO: Disables the log erasure.
3.Press the JogDial to carry out the selection.
Note: You can access pictures recorded on the disk by time & date search even after they have been erased.
Recording
Notes:
•When SIMUL REC&PLAY (simultaneous recording and playback) is set to OFF in the setup, any recording will stop playback and start the recording. Playback is unavailable while recording.
•When set to ON, recording is available while playing back.
•The recording rate will degrade to 15 FPS while display- ing a quad split screen.
■Internal Timer Recording
When INT is set for TIMER in the
|
| PROG1 SETUP | |||||||||
NO. START END | MODE | ||||||||||
1→ | 8:00 | 12:20 | SETO | ||||||||
2→ 13:00 | 15:00 | SETO | |||||||||
3→ |
| : |
|
|
|
| : |
|
|
|
|
|
|
|
|
|
| ||||||
4→ |
| : |
|
|
|
| : |
|
|
|
|
|
|
|
|
|
| ||||||
Notes:
•When SIMUL REC&PLAY is set to OFF, a preset record- ing interrupts playback and starts at the preset start time.
•When you set both the start and end time of an event to the same hour, the event will not be recorded.
•When planning to record all day long, set the start time to 00:00 and the end time to 24:00 for the final event.
•When planning to record through midnight:
Set 24:00 for the end time of the final event of the day. Set 00:00 for the start time of the initial event of the next day.
50
