59
Lower Oven Self-Clean

Setting self-clean

The clean feature provides 3 different choices for
self-cleaning the lower oven. Set the clean for lite
(2hrs),med(3hrs)orheavysoils(4hrs).The
example below shows setting the lower oven for
self-cleantobeginimmediatelyusingamedium(3
hour)setting:

Setting delayed self-clean

You may wish to set your appliance to perform a
self-cleancyclesometimelater(upto12hours
later).TheEND TIME key will determine when the
cleaning will stop.
You will need to set the END TIME out far enough
to allow for the type of clean cycle you choose
(2-3-4hours).Remembertoadd30-40additional
minutes for the oven to cool enough and the oven
door to unlock.
The example below shows setting the lower oven
foralite(2hour)self-cleancycletoendat8:00
o’clock:
After pressing start, the motorized oven door latch
willautomaticallylockthedoor.TheDOORlock
iconwillash(Fig.1).Oncethedoorhaslocked
theDOORlockiconwillremainonthroughthe
entire self-clean cycle.
After self-clean, the oven may take about 30-40
minutes to cool and unlock. A Hotmessage(Fig.
2)willdisplayduringthisperiod.Duringcoolingthe
DOORlockiconwillashanddisappearindicating
that the door has unlocked.
IMPORTANT
• Aself-cleancyclewillnotstartiftheappliance
hastheCONTROLLOCKturnedon.
• Ifaself-cleancyclewasstartedbutdidnot
nishduetoapowerfailure,yourovenmay
not be completely cleaned. After power
has been restored and the oven door has
unlocked, set for another self-clean if needed.
Fig. 2
Fig. 1
Example
NOTES
• YoumaypressCANCELanytimeduringthe
cleaning process. After cancelling the self-
clean cycle, do not attempt to open the oven
dooruntiltheDOORlockiconturnsoff.
Example
Step Press
1. Remove racks and supports
and press LOWER OVEN
2. Press CLEAN
3. Select MED or
select lite or heavy
4. Press START
Example
Step Press
1. Remove racks and
press LOWER OVEN
2. Press CLEAN
3. Select LITE
4. Press COOK OPTIONS
5. Press END TIME
6. Enter 800
7. Press START