29
Setting Microwave Controls
More or less time adjustment Should you discover that you like any of the Sensor
Modes,AutoCook,Quick Settings,AutoReheator
AutoDefrost slightly more done, touch the p ower
level + pad after touching your choice of pads or
before touching S TART pad. The display will show
MORE.
Should you discover that you like any of the Sensor
Modes,Auto Co oks, Quick Settings, Auto Reheat
orAutoDefrostslightlyless done,touchthepower
level - pad after touc hing your choice of pads or
before touching S TART pad. The display will show
LESS.
Quick Startquick start is a short-cut method to set time for 1-9
minutes at power level 100.
• Supp ose you w ant to he at a cup of soup for
two minutes.
Example
Step Press
Press number 2 pad and
wait for 4 seconds.
The oven will start after 5 seconds and will signal
then turn off automatically when finished.
Add 30 Secondsadd 30 s ec ond s provides a convenient way to extend
cooking time by 30 seconds while the oven timer is
counting down. It will add 30 seconds to the time
shown each time the pad is touched.
This pad may als o be used as a qui ck sta rt f or
30seconds ofcooking. Nonee dtotouc hSTA RT,
the oven will start immediately.
Help GuideMostsettinghasacookinghint.Ifyouwishtocheck,
touch help guide when ever the pad is lighted in
theInteractive Displayfor theseand othermanual
operation hints.
Multi Stage cooking Your oven can be programmed for up to 3 automatic
cooking sequences, switching from one power level
setting to another automatically.
Sometimes cooking directions tell you to start on one
power level and then change to a differ ent power
level. Your oven can do this automatically.
• Supposeyouwanttocookroastbeeffor5minutes
at 100% and then continue to cook for 30 minutes
at 50%.
Example
Step Press
1. Press MICRO OVEN.
2. Press multi stage.
3. Enter coo king time for first
stage.
4. Pres s power level + to get
to 100.
5. Press START toconrm
rststage.
6. Enter coo king time for
second stage.
7. Pres s power level + or -
until you get to 50.
8. Press START toconrm
second stage.
9. Press START a third time
toconrmthatyoudonot
want a third stage*.
* You can program a third stage at this step.