Panasonic WJ-HD220 Manual Recording Setup REC, Externally Specified Recording Mode EXT REC Setup

3.Select the parameter with the JogDial, and press the JogDial.

The default is REC.

REC: The channel is recorded in alarm recording, timer recording and manual recording mode.

ALM-ONLY:The channel is recorded only when the alarm operates.

4.Repeat steps 2 and 3 until all channels are set.

5.Press the [SETUP/ESC] button to return to the PROG1 SETUP, NO. 1 menu.

■Manual Recording Setup (REC

SETUP)

The WJ-HD220 will record image and audio data either with or without timer restrictions. Manual recording is available when OFF is selected for TIMER in WJ-HD220 MAIN MENU; the timer schedule does not apply. Alarm recording will also be carried out with parameters specified in this menu.

	REC SETUP
REC	MODE		SF-24H
REC	RATE		30FPS
REC	QUALITY		SUPER FINE
ALM	REC	MODE	SF-24H
REC	RATE		30FPS
REC	QUALITY		SUPER FINE
PRE	ALM	REC	0S
POST	ALM	REC	10S
DYNAMIC		REC	OFF
TRIGGER		ACTION SETUPO
CAM REC		SETUPO

Refer to ● Recording Mode Setup PROG1-4 SETUP, NO. 1- 4 for operating procedures and available parameters.

■Externally Specified Recording Mode (EXT REC SETUP)

This setting allows changing the recording mode from the ongoing one to an optional one specified here when turning on the switch connected externally to the EXT REC terminal.

1.Move the cursor to EXT REC MODE with the [D] or [C] button.

2.Select the desired mode with the JogDial, and press the JogDial.

Refer to page 26 for the recording mode parameters.

3.Press the [SETUP/ESC] button to return to WJ-HD220

MAIN MENU.

■Display Setup (DISPLAY SETUP)

You can program the display of information on the monitor, such as clock, time and date, and so forth.

DISPLAY SETUP

CLOCK→ JAN15.04		11:05
TIME&DATE	DISP.TYPE1 24H
TIME&DATE	POSI.R-LOWER
TIME&DATE	EMB. OFF
STATUS DISP.		ON
STATUS POSI.		R-LOWER
HDD FULL		1%
REMOTE LED		ON
HDD CHECK		0:00
CAMERA TITLEO

●Clock (CLOCK)

1.Press the JogDial (SET) to move the cursor to the desired position.

2.Rotate the JogDial clockwise to increase the parameter, or counter-clockwise to decrease. The positions indi- cate the year, month, day, hour, and minute respective- ly.

The default is "JAN 01. 04 0:00".

MMM DD. YY HH:MM

3.Press the JogDial (SET) to validate the selection.

4.Press the [D] or [C] button to select the next item, or press the [SETUP/ESC] button to quit the display setup.

●Time & Date (TIME&DATE DISP.)

1.Select a display type with the JogDial. The default is TYPE1 24H.

TYPE1 24H: Time and date are displayed in one line in the 24-hour system.

TYPE1 12H: Time and date are displayed in one line in the AM-PM system.

TYPE2 24H: Time and date are displayed in two lines in the 24-hour system.

TYPE2 12H: Time and date are displayed in two lines in the AM-PM system.

OFF: Does not display time and date.

JAN15.04 20:00:00

TYPE1

JAN15.04

20:00:00

TYPE2

28