Panasonic WJ-HD220 manual System Information

1.Move the cursor to the desired camera using the [D] or [C] button.

2.Select ON or OFF with the JogDial, and press the JogDial.

The default is ON.

ON: Live image of the channel is displayed.

OFF: Blackout image is displayed.

3.Repeat steps 1 and 2 until all channels are pro- grammed, or press the [SETUP/ESC] button to return to the SWITCHER SETUP menu,

Notes:

•Recording will be carried out regardless of this set- ting.

•The recorded images of the channel will be played back and displayed on the monitor even if OFF is selected.

●Secret View Setup (SECRET VIEW SETUP)

This will help to watch shoplifters without being recognized in a store where, for example, cameras and spot monitors are installed on the sales floors and a multiscreen monitor is installed in a control room. The spot monitor will black out its screen when the multi-screen monitor is switched to the single live mode to focus on the potential shoplifter.

The default setting is OFF.

ON: Enables the secret view function.

OFF: Disables the secret view function.

■System Information

(SYSTEM INFORMATION)

SYSTEM INFORMATION

HDD1 HOUR METER 10000H

HDD2 HOUR METER 10000H

HDD CAPACITY		XXX.XXG
DEFAULT→		SET→
SYSTEM	VERSION	X.XX
SYSTEM	LOGO

●HDD Hour Meter (HDD HOUR METER)

The meter shows how many hours each hard disk has been operated in playback, recording and idle. The built-in HDD needs replacement when the hour meter reads around 30 000 H.

●HDD Capacity (HDD CAPACITY)

The total usable capacity of the built-in hard disk is indicat- ed.

●Default (DEFAULT)

This enables the recorder to restore all setup data to the default values.

1.Press the JogDial to move the cursor to DEFAULT.

2.When the cursor is on SET→, press the JogDial again.

3.Select YES or NO with the JogDial, and press the JogDial.

The default is NO.

NO: Current setup data is retained.

YES: Current setup data is reset to the default values.

When all setup data are reset to the defaults, "SET DONE" is displayed for a few seconds and then changes to SET→.

Note: The recorder will restart when the network setup has been changed and the menu is closed.

●System Version (SYSTEM VERSION)

This line displays the version number of the installed sys- tem software. You will need the version number when updating the software.

43