Panasonic WJ-HD220 manual Recording Mode Setup PROG1-4 SETUP, no, Alarm Recording Mode Setup ALM

Set 00:00 for the start time of the initial event of the next day.

•A combination camera will move to the preset posi- tion if an alarm arises and the position has been assigned beforehand in TRIGGER ACTION SETUP of the REC SETUP menu.

4.Press the JogDial while the cursor is on SETO to open the event programming menu.

●Recording Mode Setup (PROG1-4 SETUP, NO. 1-4)

	PROG1 NO.1 SETUP
REC	MODE		SF-24H
REC	RATE		30FPS
REC	QUALITY		SUPER FINE
ALM	REC	MODE	SF-24H
REC	RATE		30FPS
REC	QUALITY		SUPER FINE
PRE	ALM	REC	0S
POST	ALM	REC	10S
DYNAMIC		REC	OFF
TRIGGER		ACTION SETUPO
CAM	REC	SETUPO

Parameters for internal timer recording are assigned to each event (NO. 1-4) of the program (PROG 1-4) in this menu. There are five recording modes available: super fine (SF), fine (FQ), normal (NQ), long-time (EX) and optional (SP). If combined with audio recording (-A), the number of recording modes doubles. The remaining recording time (shown as xx in the list below) is determined by the select- ed recording mode (10 options) and resolution (2 options) in the SYSTEM SETUP menu.

In the SP mode, the field rate and picture quality are vari- able and can be selected at option in the range of 0.1 to 30 FPS with five quality level options respectively. After the recording mode is selected, the available recording time is determined and displayed.

Rec Mode	Quality	Audio Record	Note
SF-xxxH	Super Fine	N/A
FQ-xxxH	Fine	N/A
NQ-xxxH	Normal	N/A
EX-xxxH	Long time	N/A
SF-AxxxH	Super Fine	Available
FQ-AxxxH	Fine	Available
NQ-AxxxH	Normal	Available
EX-AxxxH	Long time	Available
SP-AxxxH	Optional setup	Available	Field rate, quality
			selected optionally
SP-xxxH	Optional setup	N/A	Field rate, quality
			selected optionally

Notes:

•By selecting a recording time, the recording rate (REC RATE) and the recording quality (REC QUALITY) will be automatically calculated and displayed. For details, refer to the provided booklet "REC MODE TABLES for WJ-HD220".

•Even if preset to 30 or 15 FPS, the actual recording rate may drop to 7.5 FPS at worst while busy multi tasks such as playback, remote-access playback, remote- access live image, FTP access, multi-split display, or video motion detection are carried out simultaneously. The status display will indicate "*PLAY" while playing back the images recorded with a rate different from the preset.

•Suffix "xxx" following "SP-" is specified in REC MODE TABLE in the ADDENDUM attached to the manual.

1.Move the cursor to MODE, and press the JogDial. The mode area will be highlighted.

2.Select a recording mode using the JogDial, and press the Jogdial. Audio data will be recorded when a mode with hyphen A is selected.

Available recording mode: SF, FQ, NQ, EX, SP, SF-A,FQ-A,NQ-A,EX-A, and SP-A

3.When SP or SP-A is selected, specify a recording rate (REC RATE) using the JogDial, and press the JogDial.

Available recording rates: From 0.1 to 30 FPS

4.When SP or SP-A is selected, specify a recording quali- ty (REC QUALITY) using the JogDial, and press the JogDial.

Available recording qualities: SUPER FINE, FINE,

NORMAL, EXTENDED

●Alarm Recording Mode Setup (ALM

REC MODE)

Alarm events arising within the time zone specified by the program will start recording with the preset parameters. Refer to "PROG NO. SETUP" described above in this menu for operating procedures and available parameters, since they are very similar.

●Pre-alarm Recording (PRE ALM REC)

Picture recording will start prior to the alarm activation at the time specified by this setting.

1.Move the cursor to PRE ALARM REC with the [D] or [C] button.

2.Select the desired pre-recording time with the JogDial, and press the JogDial.

The default is 0S.

Available times (seconds): 0S, 1S, 2S, 3S, 4S, and 5S

26