Panasonic WJ-HD220 manual Simultaneous Recording & Playback Simul REC&PLAY, Disk End Mode Setup

●Simultaneous Recording & Playback (SIMUL REC&PLAY)

This setting specifies whether to allow simultaneous play- back and recording.

1. Move the cursor to SIMUL REC&PLAY with the [D] or

[C] button.

2. Select on or off with the JogDial, and press the JogDial.

The default is ON.

ON: Allows simultaneous recording and playback

including remote-access playback and FTP access.

The default recording rate is 15 FPS, and the high-

est rate is 30 FPS.

OFF: Places priority on recording triggered by pressing

the REC button or by an alarm input. Playback

ON: Detects alterations.

OFF: Does not detect.

Notes:

•When set to ON, the data transmission rate on the net- work will slow down.

•Ask your dealer whether alterations are found in the image data distributed via the network if necessary.

●Disk End Mode Setup

(DISK END MODE)

The menu offers the following options at the point where the available recording space on the disk is used up: [STOP], [CONTINUE]

including remote-access playback and FTP access

will be interrupted if recording starts. The default

recording rate is 15 FPS, and the highest rate is 30

FPS.

Notes:

• A 30 FPS recording rate will decrease to 15 FPS

when playback, remote-access playback, or FTP

access is carried out simultaneously with recording.

• Simultaneous playback will pause prior to a time

space depending on the recording rate when the

playback area on the disk nears the recording area.

This is to avoid the access collision caused by the

[STOP]

[CONTINUE]

[Default]

DISK START				DISK END
					Stop
					REC
			Waiting for a new entry
	Restart
	REC
DISK START				DISK END
DISK START				DISK END
		Overwritten automatically

simultaneous recording and playback in an area on

the disk.

0.1FPS: 20 minutes maximum 1 FPS: 2 minutes maximum

7.5FPS: 15 seconds maximum 15 FPS: 7 seconds maximum

•Even if preset to 30 or 15 FPS, the actual recording rate may drop to 7.5 FPS at worst while busy multi- tasks such as playback, remote-access playback, remote-access live image, FTP access, multi-split display, or video motion detection are carried out

simultaneously. The status display will indicate "*→PLAY" while playing back the images recorded

with a rate different from the preset.

●Alteration Detection Setup

(ALTER DETECT)

You can enable or disable the recorder to add alteration- detection signals in the JPEG data supplied to the network. The default is OFF.

1.Move the cursor to ALTER DETECT.

2.Select ON or OFF with the JogDial and press the JogDial.

DISK STARTDISK END

SYSTEM SETUP	(1 OF 2)
PASSWORD LOCK	OFF
ALL→	*****
OPERATION→	*****
KEYLOCK BUZZ	OFF
SKIP ALM-RECALL	1PAGE
SIMUL REC&PLAY	ON
ALTER DETECT	OFF
DISK END MODE	CONTINUE
DISK END BUZZ	ON

1.Move the cursor to DISK END MODE with the [D] or [C] button.

2.Select the desired mode with the JogDial, and press the JogDial.

The default is CONTINUE.

STOP: Stops recording until a new mode other than STOP is selected.

CONTINUE: Old data is automatically overwritten from the disk start.

Note: Remaining capacity will be displayed on the monitor by turning the JogDial counter-clockwise in recording mode when STOP is selected.

33