Panasonic WJ-HD220 manual Time & Date Search Playback

4.Press the [PLAY] button to play back the searched record.

5.Press the [STOP] button to stop playback.

Note: "Alarm Search Playback" and "Alarm Log Recall" are similar, but different in operations. Refer to

■Alarm Log Recall & Search on page 49.

6.Repeat from step 1 to search for another time and date or press the [TIME&DATE SEARCH] button to cancel the function. Pressing the [STOP] button will also end the searching.

Note: Searching may take the recorder 18 seconds at worst

■Time & Date Search Playback

A picture record of a specified time and date is played back.

5

PUSH— PAUSE SET

PLAY	REC	REC STOP
		TIME&DATE
		SEARCH	ALARM
			RECALL
	2	1	3

JAN31.04 23:00:00

TO SEARCH PUSH PLAY KEY

1.Press the [TIME&DATE SEARCH] button. The monitor displays the time & date search window.

2.Press the [D] or [C] button to move the cursor to the next position.

3.Rotate the JogDial clockwise to increase the parameter or counter-clockwise to decrease it.

4.Repeat steps 2 and 3 above until the desired parame- ters are selected.

5.Press the [PLAY] button to start playback. The monitor displays the single spot image when an input is select- ed or the nine-split image when all input is specified. The recorder stops searching when the playback reaches the end of the record.

■Multiscreen Playback

You can view a multiple playback image displayed in 4-split or 9-split pattern on the monitor at a time.

		HDD		STOP		PLAY	REC
		SETUP
		/ESC
MULTI SCREEN		FULL
			ALARM
SELECT			SERCH
		ERROR
	ZOOM
					PLAY MODE SELECT

•Normal Playback

Press the [PLAY] button to start normal playback. The image data recorded on the disk are sequentially played back, and the monitor displays images in the single display mode or multiscreen display mode.

•Multiscreen Playback

Press the [MULTI SCREEN SELECT] button an appro- priate number of times. The monitor display changes as follows. The LEDs in the [MULTI SCREEN SELECT] but- ton and respective input buttons will light up.

Single Image → Quad A (4A/comprising inputs 1, 2, 3, and 4) → Quad B (4B/inputs 5, 6, 7, and 8) → Nine-spit (inputs 1 - 8) → Quad A → Quad B → Nine-split

•Specific Input Playback

Press the respective input button. The images of the selected input are played back continuously and dis- played on the monitor.

•Stop Playback

Press the [STOP] button to stop playback.

Note: When the playback proceeds to where recording is executed on the disk, the recorder will pause playback and freeze the displayed image on the monitor.

53