Panasonic WJ-HD220 manual Camera System Setup, Only for Psdata

■ Camera System Setup	■ Network Setup (NETWORK
(CAMERA SYSTEM SETUP)	SETUP)
(only for PS•DATA)

8Camera Number (CAMERA No.)

The camera number assigned to the port is used when a system controller accesses the camera.

Assignable numbers: From 1 to 128, must be unique in the chain.

8Compensation level (COMPENSATION)

Video signal loss can be compensated for the length of the coaxial cable. "S" stand for short-distance, "M" for medium, and "L" for long.

S:≤ 500 m

M:500 m – 900 m

L:900 m – 1 200 m

8Data Communication (DATA)

ON: Enables data communications by use of PSD com- mands multiplexed on the coaxial cable.

OFF: Disables coaxial-multiplexed communications.

Click the [SET] button when all items have been set proper- ly.

8Line Speed (LINE SPEED)

AUTO: The speed is automatically selected.

100Mbps (FULL DUPLEX): 100 mega byte, full duplex

100Mbps (HALF DUPLEX): 100 mega byte, half

duplex

10Mbps (FULL DUPLEX): 10 mega byte, full duplex

10Mbps (HALF DUPLEX): 10 mega byte, half duplex

8HTTP Server Port (HTTP SERVER PORT)

Enter from the keyboard. The default setting is 80.

8DHCP On/Off (DHCP ON/OFF)

Select ON or OFF for DHCP (Dynamic Host Configuration Protocol).

IP Address (IP ADDRESS)

The IP address is displayed. Enter from the keyboard.

Netmask (NETMASK)

The netmask is displayed. Enter from the keyboard.

Default Gateway (DEFAULT GATEWAY)

The default gateway is displayed. Enter from the key- board.

68