![](/images/new-backgrounds/1130070/130070125x1.webp)
■Externally Specified Recording Mode (EXT REC SETUP)
This window specifies the recording mode and parameters that will be changed when the switch externally connected to the EXT REC terminal is turned on.
Refer to ● Recording Mode Setup
■Display Setup (DISPLAY SETUP)
TYPE2 12H: Time and date are displayed in two lines in the
OFF: Time & date display is disabled.
8Time and Date Position (TIME&DATE POSITION)
8Time & Date Embedded (TIME&DATE
EMBEDDED)
ON: The display will be embedded and recorded with the image data.
OFF: The display will not be recorded.
8Status Display (STATUS DISPLAY)
ON: Status display is enabled.
OFF: Status display is disabled.
8Status Display Position (STATUS POSITION)
8HDD Full (HDD FULL)
1% - 99%: The FULL indicator blinks when the remain- ing capacity reaches the selected value. This will take effect when DISK END MODE is set to STOP in the RECORD SETUP.
Time and date display and other displays of status informa- tion are specified in this window.
8Clock Setup (CLOCK SETUP)
Select a month, and type a day, year, hour, and minute.
8Time and Date Display (TIME&DATE DISPLAY)
TYPE1 24H: Time and date are displayed in one line in the
TYPE1 12H: Time and date are displayed in one line in the
TYPE2 24H: Time and date are displayed in two lines in the
8Remote LED (REMOTE LED)
ON: REMOTE LED turns on when the network controls the recorder.
OFF: REMOTE LED is deactivated.
8HDD Check (HDD CHECK)
ON 0:00 - 23:00: The recorder checks the HDD at the specified time every day.
OFF: Check is deactivated.
Click the [SET] button when all items have been set proper- ly.
Click the [CAMERA TITLE SETUP] button to open the CAM- ERA TITLE window.
63