[ZEBRA]
Parts where white saturation (color saturation) is likely to occur (extremely brightly lit or shiny parts) are displayed with diagonal lines (zebra pattern).
≥Change the mode to 
or 
.
≥ Switch to Manual Mode. (l 86)
: [RECORD SETUP] # [ZEBRA] # [ON] |
|
|
≥ It is possible to set from the quick menu in Manual |
|
|
Mode. (l 41) | A | Zebra pattern |
|
≥You can record an image with little white saturation if you manually adjust the shutter speed or brightness (iris/gain) (l 88).
≥The zebra pattern does not appear on the images actually recorded.
[LUMINANCE]
Displays the luminance level of the center of the screen (luminance display frame) in %. It makes the adjustment of the brightness of the object easier, by checking the luminance level of the object, when recording same object in different surroundings.
Adjust the brightness using [IRIS]. (l 88)
≥Change the mode to 
or 
.
≥Switch to Manual Mode. (l 86)
: [RECORD SETUP] # [LUMINANCE] # desired setting
≥It is possible to set from the quick menu in Manual Mode. (l 41)
[OFF]:
Cancel the setting.
[ALWAYS]:
Constantly display.
[ON ADJUST]:
Display only when [IRIS] is adjusted. (l 88)
ALuminance display frame B Luminance level
50% 
≥Luminance level is displayed between [0%] and [99%]. It will be displayed as [99%
] when it is over 99%.
≥Luminance is displayed while adjusting [IRIS] even if [DISPLAY] is set to [OFF].
80
VQT3B18
