29
VQT3B18
Preparation
Setup 6Setting date and time
When the unit is turned on for the first time, a message asking you to set the date and time
will appear.
Select [YES] and perform steps 2 to 3 below to set the date and time.
¬Change the mode to or .
1Select the menu.
2Touch the date or time to be
set, then set the desired value
using / .
ADisplaying the World time setting
(l42):
[HOME]/ [DESTINATION]
≥The year can be set between 2000 and
2039.
≥The 12-hour system is used to display the
time.
3Touch [ENTER].
≥The clock function starts at [00] seconds.
≥
A message prompting for World time s etting
may be displayed. Perform the World time
setting by touching the screen. (
l
42)
≥Touch [EXIT] or press the MENU b ut ton t o
complete the setting.
≥The date and time function is driven by a
built-in lithium battery.
≥When this unit is purchased, the clock is
set. If the time display becomes [--], the
built-in lithium battery needs to be
charged. To recharge the built-in li thium
battery, connect the AC adaptor or attach
the battery to this unit. Leave the unit as it
is for approx. 24hours and the battery will
maintain the date and time for approx.
6 months. (The battery is still being
recharged even if the unit is off.)
: [SETUP] # [CLOCK SET]
HDC-SDT750&TMT750-P-VQT3B18_mst.book 29 ページ ２０１０年８月２０日 金曜日 午後３時５３分