144
VQT3B18
Problem Check points
This unit cannot be
operated though it is
turned on.
This unit does not
operate normally.
≥Remove the battery or AC adaptor, wait about
1 minute and then reconnect the battery or AC
adaptor. Then about 1 minute later, turn on the unit
again. (Conducting the above operation while the
media is being accessed may damage the data on
the media.)
≥If normal operation is still not restored, detach the
power connected, and contact consumer support.
(l170, 171, 172)
Item other than the
touched one is
selected.
≥Calibrate the touch screen. (l47)
The remote control
does not function.
≥[REMOTE CONTROL] of the [SET UP] is [OFF].
(l49)
≥The button-type battery of the remote control may
have run out. Replace it with a new button-type
battery. (l49)
The remaining time
indication or the
elapsed time
indication is not
shown.
≥[DISPLAY] of the [SETUP] is [OFF]. (l42)
The unit arbitrarily
stops recording.
≥Use an SD card that can be used for mot ion picture
recording. (l23)
≥The recordable time may have shortened due to the
deterioration of the data writing speed or repeated
recording and deletion. Using the unit, format the SD
card. (l47)
≥If [AGS] is [ON], record in the n ormal horizontal
position or set [AGS] to [OFF]. (l75)
Auto focus function
does not work.
≥Switch to Intelligent Auto Mode.
≥If you are trying to record a scene which is hard to
bring into focus in Auto Focus Mode, use the Manual
Focus Mode to adjust the focus. (l36, 89)
HDC-SDT750&TMT750-P-VQT3B18_mst.book 144 ページ ２０１０年８月２０日 金曜日 午後３時５３分