Manuals / Brands / Photography / Camcorder / Panasonic / Photography / Camcorder

Panasonic HDC-SDT750K, HDC-SDT750PP operating instructions 1 2 3

1 176

Download 176 pages, 10.47 Mb

22

VQT3B18

Important:

While the DC cable is connected to the AC adaptor, the battery will not charge.

≥Do not use the AC cable with any other equipment as it is designed only for this unit.

Also, do not use the AC cable from other equipment with this unit.

1Connect the AC cable to the AC adaptor and the AC outlet.

2Connect the DC cable to the AC adaptor.

3Connect the DC cable to the DC input terminal [DCIN].

≥When removing the AC adaptor, be sure to hold down the power button until the status

indicator goes off. Then remove the AC adaptor.

Battery capacity indication

≥The display changes as the battery capacity reduces.

####

If there is less than 3 minutes remaining, then will become red. If the battery

discharges, then will flash.

≥The remaining battery capacity is displayed when using the Panasonic battery that you

can use for this unit. The actual time can vary depending on your actual use.

≥If the actual remaining time exceeds 9 hours 59 minutes, the indication will stay green

and will not change until the remaining time falls below 9 hours 59 minutes.

≥When using the AC adaptor or batteries made by other companies, the remaining

battery capacity will not be shown.

Connecting to the AC outlet



DC IN



ADC output terminal

BDC input terminal

Insert the DC cable matching the

[ ] m ark of the DC input

terminal.

HDC-SDT750&TMT750-P-VQT3B18_mst.book 22 ページ２０１０年８月２０日　金曜日　午後３時５３分

Contents

Main Operating Instructions High Definition Video Camera VQT3B18 Model No.HDC-SDT750PP Things You Should Know CAUTION Page Product Identification Marking Batteries Warni ng AC adaptor U.S.A./CANADA CONSUMERS: ATTENTION: IMPORTANT SAFETY INSTRUCTIONS Precautions WARNING CAUTION Indemnity about recorded content Cards that you can use with this unit For the purposes of these operating instructions Contents Preparation Before using Basic Recording/Playback Copy/Dubbing With this unit/other products With a PC Before using Using with a PC Accessories Quick Guide Charging the battery Inserting/removing an SD card Inserting the battery Turning the unit on/off Selecting a mode How to use the touch screen Language selection Recording motion pictures Recording still pictures Motion picture/Still picture playback C handling 25 26 32 27 2930 31 28 33 34 35 393736 38 40 41 42 43 44 45 Page About batteries that you can use with this unit 1 2 Charging the battery Charging lamp [CHARGE] A Install the battery by inserting it in the direction shown in the figure. Inserting/removing the battery CAUTION Charging/Recording time Charging and recording time 1 2 3 Battery capacity indication Connecting to the AC outlet DC IN Cards that you can use with this unit 1 2 cover and insert (remove) the SD card into (from) the card slot. 3 terminal cover. Inserting/removing an SD card Turning the unit on and off with the power button Turning the unit on and off with the LCD monitor/viewfinder Page viewfinder Touch Drag About the operation icons How to use the touch screen Viewfinder adjustment Recording showing the contents to a partner 2 set, then set the desired value using / . 3 Basic camera positioning Basic motion picture recording Attaching/Removing the lens hood 2 3 4 Screen indications in the Motion Picture Recording Mode About the compatibility of the recorded motion pictures HG 0h00m00s0h00m00s0h00m00s 2 3 4 About the screen indications in Still Picture Recording About the focus indication Recording still pictures in Motion Picture Recording Mode Intelligent auto/Manual button Intelligent Auto Mode Automatic white balance Auto focus picture playback 2 3 4 5 Change the thumbnail display Speaker/Headphone volume adjustment Motion picture compatibility Still picture compatibility Page 1 Press the Q.MENU button. button to exit the quick menu. 2 the setting. [DISPLAY] [CLOCK SET] [SET WORLD TIME] 5 Touch / to select your travel destination and touch [ENTER]. To return the display to the home setting [DATE/TIME] [DATE FORMAT] [ECONOMY] 1S e t [ 2 Close the LCD monitor and retract the viewfinder while the mode is set to or . 3 Open the LCD monitor or extend the viewfinder. [QUICK POWER ON] [QUICK START] 1T o u c h [ 2 Touch the desired setting item. 3 Touch / to adjust settings. 4 Touch [ENTER]. [REMOTE CONTROL] [REC LAMP] [ALERT SOUND] [POWER LCD] [LCD SET] Page 1T o u c h [ 2Touch the [_] that appears on the screen with the supplied stylus pen. 3 Touch [ENTER]. [FORMAT CARD] [CARD STATUS] [CALIBRATION] Page control 2 3 4 6 8 5 7 9 10 11 1 15 1515 2 direction button. 3 Ring zoom Extra Optical Zoom Function Changing Image Stabilizer Mode Optical image stabilizer button Setting to display/not-display the O.I.S.LOCK icon Optical Image Stabilizer Lock 2 target. 3 About target frame 1080/60p 1080/60p button 1 2 3 1 2 3 4 5 6 7 8 9 11 10 Touch [EXIT] to end the adjustment. Press the recording start/stop button to start recording. Removing the 3D Conversion Lens Functions that cannot be used during 3D recording Functions not available during 3D recording operation icons 1 PRE-REC operation icons on the screen. 2 Fade Intelligent contrast control PRE-REC PRE-REC only) Smile shot To adjust the brightness of the flash Built-in flash Red-Eye Reduction To stop the timer midway through Self-timer Intelligent exposure Backlight compensation Soft skin mode Tele macro Displaying Guidelines at playback Guideline Color Night Rec Headphone volume adjustment menus [SCENE MODE] [ZOOM MODE] [REC MODE] [TIME LAPSE REC] [DIGITAL CINEMA] [FACE RECOG.] Registering a face for face recognition 1 Align the persons face with the guide. 2 Touch [REC] or press the button fully. 3 Entering the persons name. 4 Touch [ENTER] to end registration. Changing the information of a registered person 2 Touch the desired item to enter the setting. 3 Touch [ENTER]. Canceling a registered person 2 Touch the person to cancel. [NAME DISPLAY] [FACE FRAMING] [AUTO SLOW SHTR (2D)] [AUTO SLOW SHTR (3D)] [AGS] [Digital Cinema Color] [SHOOTING GUIDE] [WIND NOISE CANCELER] [MIC SETUP] 2 Touch / to adjust the microphone input level. 3 Touch [ENTER] to determine the microphone input level and then touch [EXIT]. [MIC LEVEL] 2 Touch the desired setting items. 3 Touch / to adjust settings. 4 Touch [ENTER]. [BASS SETTING] [PICTURE ADJUST] [ZEBRA] [LUMINANCE] [HISTOGRAM] Example of the display Picture size and Maximum zoom ratio Picture size in Motion Picture Recording Mode [PICTURE SIZE] [QUALITY] [ASPECT RATIO] 2 Press the button. 4 3 Touch [Record] or [Delete]. [HI-SPEED BURST] [AF ASSIST LAMP] [SHTR SOUND] 1 2 1 2 1 2 balance mode. To set the white balance manually White balance 1 2 settings. Manual shutter speed/iris adjustment 1 2 3 Manual Focus. 4 the multi manual ring. Motion picture playback using operation icon 1 playback. 2 Creating still picture from motion picture 1 2 3 Touch / to set the time. 4 1 2 (l27) to move to the zoomed position. Zooming out from the zoomed still picture Resuming the previous playback functions 1 2 3 Playing back motion pictures/still pictures by date 2 3 5 Face Highlight Playback/Highlight Playback/Intelligent Scene Selection Scene setting Priority setting Page 2 3 5 Changing the playback settings and playing back the slide show 1 2 3 4 Page 2 3 4 5 To delete all the divided points Dividing a scene to partially delete 2 3 When you stop deleting halfway 2 Deleting personal information Protecting scenes/still pictures 2 3 4 on your TV 1 2 3 To display the on-screen information on the TV Changing the component output setting Connecting with a HDMI mini cable Listening in 5.1 channel sound Connecting with the AV multi cable 2 Functions not available during 3D playback Playback using VIERA Link (HDAVI Control ) 2 with a HDMI mini cable. 3 Other linked operations 1) 2) Copy/Dubbing Connecting a DVD burner to copy to/play back a disc About discs that can be used for copying Preparing for copying/playing back We recommend using Panasonic DVD burner VW-BN2/VW-BN01. Page 1 2 3 Copying to discs About recording formats when copying motion pictures [AVCHD] ([HA]/[HG]/[HX]/[HE]): [Standard] ([XP]/[SP]): Important Notice Approximate time for copying to a disc Page 1 Playing back the copied disc 2 Formatting discs Auto protect 2 To release the disc protection Displaying disc information Managing the copied disc disc recorder, video, etc. 1 Dubbing in high-definition picture quality 2 3 definition (AVCHD) compatible DVD recorder . Dubbing scenes recorded in 3D 1 2 3 Dubbing in standard picture quality Dubbing scenes recorded in 3D PC Page About Conversion Assist Function Important Notice http://panasonic.net/avc/sdcard/information/SDXC.html End User License Agreement With a PC Operating environment for HD Writer AE 2.6T To use the HDWriter AE 2.6T Operating environment for the card reader function (mass storage) 1 2 3 4 Page 1 2 3 4 To disconnect USB cable safely Copying your still pictures to your PC About the PC display DCIM CAM_SD Starting HD Writer AE 2.6T Reading the operating instructions of the software applications 1 2 3 4 Recording indications R 1h20m Page Playback indications Indication of connection to other devices Confirmatory indications Confirmatory indications when a DVD burner is connected Page About recovery Troubleshooting Page Page Page Page If scenes do not change smoothly when played back on another device Cautions for use About this unit About the battery About the AC adaptor About the 3D Conversion Lens About 3D recording About 3D About 3D viewing About the SD card LCD monitor/viewfinder Causes of condensation About personal information About condensation About copyright Carefully observe copyright laws Licenses Recording modes/approximate recordable time Approximate number of recordable Page Specifications Page Page 3D Conversion Lens Motion pictures Still pictures Optional accessories Page Page Page In CANADA, please contact your local Panasonic dealer for more information on Accessories. HDC-SDT750&TMT750-P-VQT3B18_mst.book 168 Accessory Order Form (For USA and Puerto Rico Customers) Limited Warranty (ONLY FOR U.S.A. AND PUERTO RICO) Limited Warranty Limited Warranty Coverage (For USA and Puerto Rico Only) Product or Part Name Parts Labor Carry-In or Mail-In Service Page Warranty (For Canadian Customers) HDC-SDT750&TMT750-P-VQT3B18_mst.book 171 Panasonic Canada Inc. PANASONIC PRODUCT LIMITED WARRANTY Camcorder Products - One (1) year, parts and labour Useful Information (Only For Latin American Countries) Customer Service Customer Service Directory http://www.lar.panasonic.com Mexico Service email: atencion.clientes@mx.panasonic.com Index Numerics A B C M N O P Q Page P