Panasonic WJ-HD220 Disk Capacity Warning HDD Full, Remote LED Remote LED, Disk Check HDD Check

R-LOWER:Displays status in the lower right corner.

R-UPPER:Displays status in the upper right corner.

L-LOWER:Displays status in the lower left corner

L-UPPER:Displays status in the upper left corner.

2.Press the JogDial (SET) to validate the selection.

3.Press the [D] or [C] button to select the next item, or press the [SETUP/ESC] button to quit the display setup.

Note: When the 9-split screen is displayed, the status posi- tion is fixed to R-LOWER.

●Disk Capacity Warning (HDD FULL)

The recorder monitors the disk capacity to warn the opera- tor that the available capacity is nearing its end when STOP is selected for DISK END MODE. There are two warning levels. First, the FULL indicator on the front panel blinks when the remaining capacity has reached the preset value. Finally, the buzzer beeps when the disk is full, provided that the DISK END BUZZER parameter in the SYSTEM SETUP is set to ON. At the same time, the FULL indicator turns on.

DISPLAY SETUP

CLOCK→ JAN15.04		11:05
TIME&DATE	DISP.TYPE1 24H
TIME&DATE	POSI.R-LOWER
TIME&DATE	EMB. OFF
STATUS DISP.		ON
STATUS POSI.		R-LOWER
HDD FULL		1%
REMOTE LED		ON
HDD CHECK		0:00
CAMERA TITLEO

1.Select the desired value with the JogDial. The default is 1 %.

1% - 99%: The FULL indicator blinks when the remain- ing capacity reaches the selected value.

2.Press the JogDial (SET) to validate the selection.

3.Press the [D] or [C] button to select the next item, or press the [SETUP/ESC] button to quit the display setup.

●Remote LED (REMOTE LED)

The remote LED on the front panel will indicate or ignore the remote controlled status of the recorder via the network.

DISPLAY SETUP

CLOCK→ JAN15.04		11:05
TIME&DATE	DISP.TYPE1 24H
TIME&DATE	POSI.R-LOWER
TIME&DATE	EMB. OFF
STATUS DISP.		ON
STATUS POSI.		R-LOWER
HDD FULL		1%
REMOTE LED		ON
HDD CHECK		0:00
CAMERA TITLEO

1.Select either ON or OFF with the JogDial. The default is OFF.

ON: REMOTE LED turns on when the network controls the recorder.

OFF: REMOTE LED is deactivated.

2.Press the JogDial (SET) to validate the selection.

3.Press the [D] or [C] button to select the next item, or press the [SETUP/ESC] button to quit the display setup.

●Disk Check (HDD CHECK)

S.M.A.R.T. (Self-Monitoring Analysis and Reporting Technology) is activated or deactivated for HDD check.

DISPLAY SETUP

CLOCK→ JAN15.04		11:05
TIME&DATE	DISP.TYPE1 24H
TIME&DATE	POSI.R-LOWER
TIME&DATE	EMB. OFF
STATUS DISP.		ON
STATUS POSI.		R-LOWER
HDD FULL		1%
REMOTE LED		ON
HDD CHECK		0:00
CAMERA TITLEO

1.Select either ON or OFF with the JogDial. The default is OFF.

ON 0:00-23:00:The recorder checks the HDD at the specified time every day.

OFF: Check is deactivated.

2.Press the JogDial (SET) to validate the selection.

3.Press the [D] or [C] button to select the next item, or press the [SETUP/ESC] button to quit the display setup.

Note: Recording will resume after a one-second inter- mission when HDD is checked.

30