Sharp operation manual Specifications, References, 02/5/27 CD-XP160WSCAE3.fm

CD-XP160W

Specifications

References - Specifications -

29

As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification fig- ures indicated are nominal values of production units. There may be some deviations from these values in individual units.

General
T	AC 110/127/220/230 - 240 V, 50/60 Hz
Power source
Power	70 W
consumption
Dimensions	Width: 270 mm (10-5/8")
	Height: 305 mm (12")
	Depth: 343 mm (13-1/2")
Weight	6.6 kg (14.5 lbs.)
Amplifier
T	MPO: 100 W (50 W + 50 W) (10 % T.H.D.)
Output power
	RMS: 66 W (33 W + 33 W) (10 % T.H.D.)
	RMS: 55 W (27.5 W + 27.5 W) (0.9 %
	T.H.D.)
Output terminals	Speakers: 6 ohms
	Headphones: 16 - 50 ohms (recommended:
	32 ohms)
Input terminal	Microphone: 1 mV/600 ohms

CD player

Type	3-disc multi-play compact disc player
Signal readout	Non-contact, 3-beam semiconductor laser
	pickup
D/A converter	1-bit D/A converter
Frequency	20 - 20,000 Hz
response
Dynamic range	90 dB (1 kHz)

Tuner

Frequency range FM: 88 - 108 MHz

AM: 531 - 1,602 kHz

Cassette deck

Frequency	125 - 8,000 Hz (Normal tape)
T
response
Signal/noise ratio	50 dB (TAPE 1, recording/playback)
	50 dB (TAPE 2, playback)
Wow and flutter	0.3 % (WRMS)
T
Speaker
Type	Twin-drive speaker system
	10 cm (4") woofer x 2
Maximum input	66 W
power
Rated input power	33 W
Impedance	6 ohms
Dimensions	Width: 200 mm (7-7/8")
	Height: 305 mm (12")
	Depth: 175 mm (6-9/16")
Weight	2.6 kg (5.7 lbs.)/each

02/5/27 CD-XP160W(SCA)E3.fm