Advanced CD playback (continued)
CD Playback - Advanced CD playback -
17
Programmed play
TThis may be operated only with the remote control.
You can choose up to 20 selections for playback in the order you like.
1
2
3
4Repeat steps 1 - 3 for other tracks. Up to 20 tracks can be programmed.
If you make a mistake, the programmed tracks can be cleared by pressing the CLEAR button.
5 Press the / button to start playback.
To clear the programmed selections:
Whilst the "MEMORY" indicator is lit, set the CD to the stop mode and then press the CLEAR button.
Each time the button is pressed, one track will be cleared, beginning with the last track programmed. When all the tracks are cleared, "MEMORY" will disappear.
Adding tracks to the programme:
If a programme has been previously stored, the "MEMORY" indica- tor will be displayed. Then follow steps 1 - 3 to add tracks. The new tracks will be stored after the last track of the original programme.
Notes:
If you open the disc tray, change to another function or enter the
During programme operation, random play is not possible.
Care of compact discs
TCompact discs are fairly resistant to damage, however mistracking
can occur due to an accumulation of dirt on the disc surface. Follow the guidelines below for maximum enjoyment from your CD collec- tion and player.
Do not write on either side of the disc, particularly the
zmoisture.
Always hold the CDs by the edges. Fingerprints, dirt, or water on the CDs can cause noise or mistracking. If a CD is dirty or does not play properly, clean it with a soft, dry cloth, wiping straight out from the centre, along the radius.
NO
02/5/27