Sharp operation manual Preparation for Use - System connections, 02/5/27 CD-XP160WSCAE1.fm

75 ohm coaxial cable

External FM aerial

< Attaching to the wall >

Wall Screws (not supplied)

Aerial connection

TSupplied FM aerial:

Connect the FM aerial wire to the FM 75 OHMS terminal and posi- tion the FM aerial wire in the direction where the strongest signal can be received.

Supplied AM loop aerial:

Connect the AM loop aerial to the AM LOOP socket. Position the AM loop aerial for optimum reception. Place the AM loop aerial on a shelf, etc., or attach it to a stand or a wall with screws (not supplied).

Note:

Placing the aerial on the unit or near the AC power lead may cause noise pickup. Place the aerial away from the unit for better reception.

Installing the AM loop aerial: < Assembling >

External FM aerial:

Use an external FM aerial if you require better reception. Consult your dealer.

Note:

When an external FM aerial is used, disconnect the supplied FM aerial wire.

CD-XP160W

	Speaker connection
Connect the black wire to the minus (-) terminal and the red to the
plus (+) terminal.
	Right speaker	Left speaker
Caution:
T	Use speakers with an impedance of 6 ohms or		Preparation for Use - System connections -
	more, as lower impedance speakers can damage
	the unit.
	Do not mistake the right and the left channels. The
	right speaker is the one on the right side when you
	face the unit.
	Do not let the bare speaker wires touch each
	other.
	Do not allow any objects to fall into or to be placed
zin the bass reflex ducts.
	Do not stand or sit on the speakers. You may be in- Incorrect
	jured.
Notes:
	The speaker grilles are not removable.
	There is no physical distinction between the right and left speak-
	ers.

8

02/5/27 CD-XP160W(SCA)E1.fm