Sharp operation manual Recording to a cassette tape, 02/5/27 CD-XP160WSCAE3.fm

Recording to a cassette tape

Before recording:

	When recording important selections, make a preliminary test to
	ensure that the desired material is properly recorded.
	SHARP is not liable for damage or loss of your recording arising
	from malfunction of this unit.
	The volume and sound controls can be adjusted with no effect on
	the recorded signal (Variable Sound Monitor).
	For recording, use only normal tapes. Do not use metal or
z	CrO	tapes.
	Recording can be operated in the TAPE 1 compartment. The
	TAPE 2 is for playback only.

Erase-prevention tab of cassette tapes:

When recording on a cassette tape,		Side A
make sure that the erase-prevention
tabs are not removed. Cassettes have		Tab for
removable tabs that prevent accidental	Tab for
zrecording or erasing.	side B	side A

To protect the recorded sound, remove the tab after recording. Cover the tab hole with adhesive tape to record on the tape without the tab.

CD-XP160W

Recording from a CD (CDs)

You can record 3 CDs continuously.

1 Press the ON/STAND-BY button to turn the power on.

2 Load a cassette into the TAPE 1 cassette compartment with the side to be recorded on facing you.

Wind past the leader of the tape, on which recording cannot be performed.

To
3 Press the CD button and load the desired disc.								-
								cassetteatotape
4 Press one of the				1 -	3 buttons on the remote control		Recording
to select the disc to be recorded first.
5 Press the			button of TAPE
1, which also engages the
button.
CD playback and tape recording will start.
							Tape	Recording
stop recording:
Press the	button of TAPE 1.
perform programmed recording:
1 Press the CD button.
2 Programme discs and tracks (see page 17).								-
3 Press the		button of TAPE 1, which also engages the				button.

22

02/5/27 CD-XP160W(SCA)E3.fm