Sharp CD-XP160W operation manual Listening to a cassette tape, Listening to the radio continued

Store the stations in memory, in order, starting with preset channel 1.

Within 5 seconds, press the

MEMORY button to store that

station in memory.

If the preset number indicators go out before the station is memorised, repeat the operation from step 2.

Repeat steps 1 - 4 to set other stations, or to change a pre- set station.

When a new station is stored in memory, the station previously memorised will be erased.

Within 5 seconds, press the PRESET ( select the preset channel number.

Perform steps 1 - 3 in "Tuning" on page 18.

Press the MEMORY button to

enter the preset tuning sav-

ing mode.

) button to

or

CD-XP160W

Radio / Tape Playback - Listening to the radio / Listening to a cassette tape -

19

Listening to the radio (continued)

Memorising a station

TThis may be operated only with the remote control.

You can store 30 AM and FM stations in memory and recall them at the push of a button. (Preset tuning)

1

2

3

4

5

Note:

The backup function protects the memorised stations for a few hours should there be a power failure or if the AC power lead dis- connected.

To recall a memorised station

TPress the PRESET ( or ) button to select the desired sta- tion.

Listening to a cassette tape

Before playback:

For playback, use normal or low-noise tapes for the best sound. (Metal or CrO tapes are not rec- ommended.)

Do not use C-120 tapes or poor-quality tapes, as

zthey may cause malfunctions.

Before loading a tape into the cassette compart- ment, tighten the slack with a pen or a pencil.

02/5/27 CD-XP160W(SCA)E2..fm