Sharp operation manual Troubleshooting chart continued, References, 02/5/27 CD-XP160WSCAE3.fm

Press the ON/STAND-BY button to enter the power stand-by mode.

Whilst pressing down the TUNER (BAND) button and the DISC SKIP button, press the ON/STAND-BY button until "CLEAR" appears.

Clearing all the memory (reset)

Before transporting the unit

Press the ON/STAND-BY button to turn the power on. Remove all discs from the unit and close the disc tray.

Press the ON/STAND-BY button to enter the stand-by mode. “SHARP” is displayed.

zWhen “SHARP” disappears, unplug the AC power lead from the AC outlet.

CD-XP160W

Troubleshooting chart (continued)

References	Troubleshooting chart -
	-

27

If trouble occurs

TWhen this product is subjected to strong external interference

(mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is operated incorrectly, it may malfunction.

If such a problem occurs, do the following:

1 Set the unit to the stand-by mode and turn the power on again. 2 If the unit is not restored in the previous operation, unplug and

plug in the unit, and then turn the power on.

Note:

If neither operation above restores the unit, clear all the memory by resetting it.

2

T1

Caution:

This operation will erase all data stored in memory including clock, timer settings, tuner preset, and CD programme.

Condensation

TSudden temperature changes, storage or operation in an extremely humid environment may cause condensation inside the cabinet (CD pickup, tape heads, etc.) or on the transmitter on the remote control. Condensation can cause the unit to malfunction. If this happens, leave the power on with no disc (or cassette) in the unit until normal playback is possible (about 1 hour). Wipe off any condensation on the transmitter with a soft cloth before operating the unit.

2

T1

3

4

02/5/27 CD-XP160W(SCA)E3.fm