Preparation for Use - System connections -
9
System connections (continued)
Setting the AC voltage selector
TCheck the setting of the AC voltage selector located on the rear panel before plugging the unit into a wall socket. If necessary, adjust the selector to correspond to the AC power voltage used in your area.
Turn the selector with a screwdriver until the appropriate volt- age number appears in the window (110 V, 127 V, 220 V or 230 V - 240 V AC).
TAfter checking all the connections have been made correctly, con- nect the AC power lead to the AC power input socket, then plug the AC power lead of this unit into the wall socket. If you plug in the unit first, the unit will enter the demonstration mode (see page 10).
Notes:
Unplug the AC power lead from the wall socket if the unit will not zbe in use for a prolonged period of time.
Never use a power lead other than the one supplied. Otherwise, a malfunction or an accident may occur.
AC Plug Adaptor
In areas (or countries) where a wall socket as shown in illustration 
is used, connect the unit using the AC plug adaptor supplied with the unit, as illustrated. The AC plug adaptor is not included in areas where the wall socket and AC power plug can be directly connected (see illustration 
).
02/5/27
