Peavey pRP 7 owner manual Tune, To raise the tuning

Page 20

Tune

The TUNE function allows you fine tune the instrument. The default status of the instrument corresponds the equal standard A = 440 Hz, shown in the display as the setting “00”. The TUNE value has a range of ± 63, corresponding to an excursion of approximately one semitone.

1.Press and hold the TUNE function key (G7) and press either the TEMPO/ DATA + or the – button to raise or lower the tuning accordingly.

The first time you press the TEMPO/DATA + or – button, the 3 digit LCD display will show the current setting (00) and you will hear a sinusoidal reference note A play at the standard pitch.

To raise the tuning

2.While still holding down the TUNE function key (G7), press the TEMPO/ DATA + button repeatedly until you obtain the required tuning.

The LCD display will show the current setting and the reference sinusoidal sound will play with the current tuned pitch.

Release the TUNE function key (G7) to escape the function.

To lower the tuning

3.While holding down the TUNE function key (G7), press the TEMPO/DATA

– button repeatedly until you obtain the required tuning.

The LCD display will show the current setting and the reference sinusoidal sound will play with the current tuned pitch.

Release the TUNE function key (G7) to escape the function.

The current Tune setting will remain memorized even after turning the instrument off.

To reset the tuning

4.Hold down the TUNE function key (G7) and press both the TEMPO/DATA +/– buttons at the same time.

The LCD display will show the standard setting and the reference sinusoidal sound will play with the standard pitch (C = C).

16

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Page General safety instructions Contents Appendix Introduction Front and rear panel Front PanelTouch Rear panel PedalsPlaying the pRP7 Play using the Pitch/Modulation Joystick Pedal ConnectionListen to the Demo songs Select a single demonstration songPRP7 Presets Selection buttonsPreset selection Activate Split mode Change the Split point settingControl section Realtime operationsActivate Layer mode Add effects to the selected PresetChange the Volume Balance between two sounds Transpose LED of the Transpose b button remains on to indicateTouch Functions of the pRP7 To raise the tuning TuneMidi Channel Midi Local Midi Common channel About Midi Midi channelsMidi messages transmitted and received by pRP7 Midi Applications As a Midi controlling deviceAs a Slave device Midi Sequencer recordingRecording Studio Recording a songRecording a new song Click metronomeSong Library Select a sequence from the Song LibraryPanel Reset Damper Physical Model Technical specifications pRP7Technology Index Appendix Page PRP7 Midi Sound table GM-GMX PRP7 Presets PRP7 Song Library Drumkit Tables Drumkit tables A6 Appendix Midi Implementation Chart Control Change on tracks Federal Communications Commission Generalmusic Code
Top Page Image Contents