Peavey X-Four Aux send features, Aux sends, Aux 1-4, 5/6 pre-fader-PRE, Aux stereo 5/6

Page 13

mono input module 1

aux send features

Six auxiliary AUX SENDS are available for creating individual output mixes. These mixes can be used for driving effects processors, providing monitor mixes, creating broadcast or alternate sound reinforcement mixes, or other special requirements.

aux sends 1–6

These knobs adjust the amount of signal sent to the AUX buses. Unity gain occurs at the zero setting. AUX 6 and 8 controls pan function when selected for stereo operation.

aux 1–4, 5/6 pre-fader—PRE

The default signal source for the AUX SENDS is post-fader.These switches are used for selecting the pre-fader signal for their respective auxes.The pre-fader signal is derived post-mute and post-eq.

see—internal jumper options

AUX SENDS are post-eq, post-mute, and post-fader.

AUX SENDS are post-eq, post-mute, and pre-fader.

aux stereo 5/6

The default configuration for AUX 5, and 6, are mono, as with AUX 1–4. In situations where stereo-aux signals are required (such as driving stereo in-ear monitors or effects processors), this switch reconfigures the AUX SENDS to operate in stereo by changing the functions of the potentiometers.

AUXES are configured as individual mono sends.

AUXES are configured as level and pan for stereo operation.

p. 13

Image 13

Contents Four mixing console Manual Table of contents Page Conventions Module Block diagram Panel Phantom power-+48V FeaturesPad LineMono input module High-pass filter-HPF GainModule EQ features 1mono input module Aux sends Aux send featuresAux 1-4, 5/6 pre-fader-PRE Aux stereo 5/6Panel Left-center-right-LCR Bus assignment featuresPan control MuteMono input module Mono input module Mono input module Peak indicator-PK Level meter featuresSignal level LED’s Signal present indicator-SIGMono input module Left / right assignment-L-R Mono assignment-MGroup 1-4 assignment Pre-fader listen-PFL1mono input module Rear panel features Stereo input module Line select-Line Left and right mono-switchesStereo input module Input gain-GAIN Stereo input module Equalizer-EQ on Four-band stereo EQ featuresPanel Stereo balance 5 and 6-STEREO Aux send 1-6 controls2stereo input module Balance control 2stereo input module Left/right assignment-L/R 2stereo input module Balance on-groups-BAL on 2stereo input module Line-input left and right RCA connectors Balanced left and right line-in XLR connectorsLine-input left and right 1/4TRS jacks Group module Mid frequency-MID Output eq featuresGroup module Group equalization -per output channel-EQ to Group Group module Matrix 1-2 levels-M1, M2 Matrix featuresPost-group Panel Reversing aux / group and aux / main Fader reverseAux 1-6 output level After-fader listen-AFLGroup module Mono assignment-fromgroup-MONO Group assignment featuresLeft/right assignment-fromgroup-L/R PanGroup module Signal/peak LED’s Group/aux level featuresFader Panel Group insert point Group outputGroup insert send Group insert returnLamp dim switch and DC in connector Aux insert point Auxiliary 1-6 output XLR’sAux insert send Group inputsModule Block diagram High frequency-HF Master module Left,right,mono equalization-EQ to LEFT,TO RIGHT,TO Mono Module Post-left, post-right, post-mono Left, right, and mono levels-MATRIX1-2External input levels-MATRIX1-2 Panel Master output levels-MTX1-2 Matrix output featuresMatrix 1-2 talkback-TALK to Master module Pre switch Alternate out featuresAlternate out level Sum monoMaster module Monitor-out level Monitor output featuresSolo-off Headphone levelFour Block Diagram Signal/peak LED-SIG/PEAK Left master featuresTalkback left/right-TALK to Sum left/right-SUM L/RPanel Left/center/right-LCR to Master Right master featuresRight master fader Four Block Diagram Solo on indicator Mono master featuresTalkback mono-TALK to Mono Main left/ main right-L-R to MonoPanel Talkback level Talkback featuresPink noise Talkback on-TALK onModule Block diagram Left and right monitor output jacks Left and right alternate output XLR’sMatrix 1-2 output XLR’s Left, right and mono output XLR’sModule Insert points-left, right, and mono DC power-inSpecifications Model 5A power supplyPower requirements Power supply usageSupply identification Ground linkingPower supply Redundant power supplies Console and power supply groundingMultiple power supplies in-series D7000011 10 /12 /99