Peavey X-Four Auxiliary 1-6 output XLR’s, Aux insert point, Aux insert send, Group inputs

Page 55

group module 3

rear panel features

auxiliary 1–6 output XLR’s

MThis balanced male XLR connector carries the AUX output signal. These outputs are controlled by their respective AUX output level controls.

see—auxsection, front panel description

aux insert point

Separate 1/4" TRS jacks provide the ability to insert an external signal processor into the signal path of the AUX.

aux insert send

This output connects to the input of an external signal proces- sor. The signal is derived after the group-summing amplifier.

This output is ground-compensated.

group inputs 1–4

These 1/4" TRS jacks accept balanced or unbalanced line-level signals. They act as external inputs for GROUPS 1–4.

lamp dim

Goose-neck lamps light-up at full intensity.

Goose-neck lamps light-up at medium intensity.

Plugging a 1/4" plug into this jack does not break the internal signal flow of the Group.

+

p. 55

Image 55

Contents Four mixing console Manual Table of contents Page Conventions Module Block diagram Panel Line FeaturesPhantom power-+48V PadMono input module High-pass filter-HPF GainModule EQ features 1mono input module Aux stereo 5/6 Aux send featuresAux sends Aux 1-4, 5/6 pre-fader-PREPanel Mute Bus assignment featuresLeft-center-right-LCR Pan controlMono input module Mono input module Mono input module Signal present indicator-SIG Level meter featuresPeak indicator-PK Signal level LED’sMono input module Pre-fader listen-PFL Mono assignment-MLeft / right assignment-L-R Group 1-4 assignment1mono input module Rear panel features Stereo input module Line select-Line Left and right mono-switchesStereo input module Input gain-GAIN Stereo input module Equalizer-EQ on Four-band stereo EQ featuresPanel Stereo balance 5 and 6-STEREO Aux send 1-6 controls2stereo input module Balance control 2stereo input module Left/right assignment-L/R 2stereo input module Balance on-groups-BAL on 2stereo input module Line-input left and right RCA connectors Balanced left and right line-in XLR connectorsLine-input left and right 1/4TRS jacks Group module Mid frequency-MID Output eq featuresGroup module Group equalization -per output channel-EQ to Group Group module Matrix 1-2 levels-M1, M2 Matrix featuresPost-group Panel After-fader listen-AFL Fader reverseReversing aux / group and aux / main Aux 1-6 output levelGroup module Pan Group assignment featuresMono assignment-fromgroup-MONO Left/right assignment-fromgroup-L/RGroup module Signal/peak LED’s Group/aux level featuresFader Panel Group insert return Group outputGroup insert point Group insert sendLamp dim switch and DC in connector Group inputs Auxiliary 1-6 output XLR’sAux insert point Aux insert sendModule Block diagram High frequency-HF Master module Left,right,mono equalization-EQ to LEFT,TO RIGHT,TO Mono Module Post-left, post-right, post-mono Left, right, and mono levels-MATRIX1-2External input levels-MATRIX1-2 Panel Master output levels-MTX1-2 Matrix output featuresMatrix 1-2 talkback-TALK to Master module Sum mono Alternate out featuresPre switch Alternate out levelMaster module Headphone level Monitor output featuresMonitor-out level Solo-offFour Block Diagram Sum left/right-SUM L/R Left master featuresSignal/peak LED-SIG/PEAK Talkback left/right-TALK toPanel Left/center/right-LCR to Master Right master featuresRight master fader Four Block Diagram Main left/ main right-L-R to Mono Mono master featuresSolo on indicator Talkback mono-TALK to MonoPanel Talkback on-TALK on Talkback featuresTalkback level Pink noiseModule Block diagram Left, right and mono output XLR’s Left and right alternate output XLR’sLeft and right monitor output jacks Matrix 1-2 output XLR’sModule Insert points-left, right, and mono DC power-inSpecifications Model 5A power supplyGround linking Power supply usagePower requirements Supply identificationPower supply Redundant power supplies Console and power supply groundingMultiple power supplies in-series D7000011 10 /12 /99