Peavey X-Four owner manual Mono assignment-M, Left / right assignment-L-R, Group 1-4 assignment

bus assignment features

mono assignment—M

The signal is assigned to the discrete mono bus. When the LCR button is depressed, this switch is bypassed.

mono input module 1

Always turn off and	+
disconnect the amplifi-
er from mains voltage
before making audio
connections.

As an extra precaution, have the attenuators turned down during power-up.

left / right assignment—L-R

The Group signal is assigned to the main Left and Right output buses, deriving its signal after the channels pan system.When the LCR button is depressed, this switch is bypassed.

pan on—groups—BAL ON

The four GROUP assignment switches assign the input signal in mono, independent of the pan pot.

The four GROUP assignment switches assign signals as four stereo- pairs.The PAN control governs the stereo placement of the four stereo- pairs, which are now configured as odd–left / even–right.

For example:GROUP 1—left,GROUP2—right,GROUP3—left,GROUP4—right.

group 1–4 assignment

The input channel's post-fader signal is assigned to the correspond- ing GROUP bus(es).

see—panon—groups

input fader

The input fader is the primary level control for signals being sent to any of the console's mix buses.The only signals not affected are AUX sends select- ed to be pre-fader. The fader offers greater than 80db of attenuation and up to 10db of boost. Normal operation is between -10 and 0.

pre-fader listen—PFL

Pressing this switch will include (illuminated) or exclude (not-illumi- nated) the input channel.

see—master module

p. 21